Wiltshire · England

Bath Repair for Luckington homes

Local bath repair for Luckington: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Chips caused by builders
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Luckington

Luckington and nearby

Luckington is about 8 miles east of Yate, in Wiltshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 425 places across Wiltshire. Our nearest city page is Birmingham, about 65 miles away.

Our visits in SN14 are booked in the same way as anywhere else. Whether you live on Church Road, Chapel Row and Hollis Gardens or a nearby road, we can come to you. Neighbouring places we cover include Alderton (1 mile south), Sherston (2 miles north-east), Badminton (2 miles south-west), Little Badminton (2 miles west) and Acton Turville (2 miles south-west). Larger places within reach include Chippenham (8 miles south-east), Calne (13 miles south-east), Melksham (13 miles south), Corsham (9 miles south), Bradford-on-Avon (14 miles south) and Malmesbury (7 miles east).

Landmarks near Luckington

Our clients here include homes close to Church of Saint Mary and Saint Ethelbert, Old Royal Ship pub and Luckington Community School, among other places.

Map of Luckington © OpenStreetMap contributors

Bath repair in Luckington, done in place

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can usually use the bath the day after. Whether it’s rust spots around the plughole and holes from dropped items, we can usually put it right, on cast iron enamel, pressed steel enamel and whirlpool & spa baths alike.

Every repair is covered by our one-year guarantee.

Area
Luckington (SN14)
County
Wiltshire
Cover
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

How it works

On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a morning or an afternoon.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the following day.

How to prepare

  • Have a window or extractor fan available
  • Let us know which floor the room is on
  • Let us know if it has been repaired before

Getting a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Get a free quote

Advice

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

What a repair cannot fix

Some jobs are not right for a repair, including:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • A bath that moves underfoot, until its support is fixed
  • Metal that has corroded all the way through

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths

Landlord and trade work in Luckington

If you manage property in Luckington, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Common problems we fix in Luckington

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.

You may need us if you’ve spotted any of these:

  • Scratches you can feel with a fingernail
  • Rusty patches near the plughole
  • Chips under the taps
  • A kit repair that didn’t last

Before booking anyone

  • A fixed quote, and whether VAT is included
  • The length of the guarantee and what it covers
  • Whether a trained technician does the job
  • What happens if they find more damage

Our hiring checklist

Different materials, different repairs

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Questions from Luckington

Do you cover Luckington?

Yes, we do. Technicians travel to Luckington from across the region, and the price is the same as everywhere else.

Can you repair a crack in an acrylic bath?

Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.

Can you fix rust around the plughole?

Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.

How do I book?

A close-up, a wider photo and your postcode. Then we will agree a date.

Do you repair coloured baths?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

Can you redo an old repair?

Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.

How long does the repair take to cure?

Most baths can be used the next day. We will tell you the exact curing time when we finish.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Prices and what affects them

Repairs from £95. We price every job individually. The main factors are:

  • How hard the colour is to match
  • Previous DIY repairs that have to come out
  • How many items we do on one visit
  • The material and finish

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Send pictures for a quote

We price nearly every job from photos. This is what to send:

  • Whether it’s been repaired or coated before
  • The material, if you know it
  • A clear, close picture of the problem area
  • A coin beside the damage so we can judge size

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.

Repair or replace in Luckington?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.

Why Luckington customers choose us

  • Straight answers about what a repair can do
  • Dust sheets down, tidy finish
  • Normally one visit, start to finish
  • We come to you, anywhere in the UK

See our full price list and resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.