Somerset · England
Bath chip & crack repair in Lullington, Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Lullington. Free, fixed quotes from your photos.
- Repairs from £95
- Chips caused by builders
- Cracks in an acrylic bath
Lullington and the surrounding area
Lullington is about 2 miles north of Frome, in Somerset. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. We cover all 640 towns and villages across Somerset.
Our visits in BA11 work the same way as everywhere else we cover. If you are just outside Lullington, we cover Oldford (1 mile south), Laverton (2 miles north-west), Buckland Dinham (2 miles west), Hapsford (2 miles south-west) and Frome (2 miles south). Larger places within reach include Midsomer Norton (8 miles west), Shepton Mallet (12 miles south-west), Radstock (7 miles west), Wincanton (15 miles south), Castle Cary (15 miles south-west) and Westfield (6 miles west).
Local landmarks in Lullington
Around Lullington, we work in homes near Beckington Church of England First School, The Woolpack pub and Frome College and the streets around them. For rail, the closest station is Frome station, roughly 2.6 miles south. Nearby you will also find Trowbridge Community Hospital (5.9 miles north-east) and The Woodland Heritage Museum (3.2 miles east). For a walk, there’s Vallis Vale and Orchardleigh Lake.
How we handle bath repair in Lullington
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair whirlpool & spa baths, cast iron enamel and acrylic, and common reasons people contact us are deep scratches in acrylic and chips under the taps.
We stand behind the work with a one-year guarantee.
- Area
- Lullington (BA11)
- County
- Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Repair or replace in Lullington?
A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- Honest advice, even when it means no job
- Fixed prices from your pictures
See our prices page and bath cost comparison.
Signs you need bath repair in Lullington
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
If you can see any of these, send us a picture:
- A chipped rim or side
- An old repair that has yellowed or come loose
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
Before booking anyone
- Whether a trained technician does the job
- Aftercare advice
- Whether cleaning and preparation are in the price
- How the colour is matched
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Do not leave a fresh chip for long
- Use a soft cloth and washing-up liquid for everyday cleaning
- Check that an acrylic bath doesn’t move when you stand in it
- Do not scrub with anything abrasive
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
What a repair can’t fix
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Acrylic cracks with no access behind them
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
More services for Lullington
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes two to three hours for most chips, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the day after, the bath is ready to use.
How to prepare
- Tell us about parking, stairs or access
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Related advice
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
For landlords and businesses
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Lullington questions
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you repair a hole in a bath?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
About our accreditations · Every repair comes with a one-year guarantee.
