Wrexham · Wales
Bath chip & crack repair in Marford, Wrexham
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Marford and across Wrexham. Free, fixed quotes from your pictures.
- Repairs from £95
- A hole punched through by something heavy
- Chips on the rim or sides
About our bath repair in Marford
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair whirlpool & spa baths, roll-top & freestanding and pressed steel enamel, and common reasons people contact us are rusty patches near the plughole and chips caused by builders.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Area
- Marford (LL12)
- County
- Wrexham
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Landlord and trade work in Marford
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
What a repair can’t fix
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Get a dripping tap fixed promptly
- Use a soft cloth and washing-up liquid for everyday cleaning
- Keep metal cans and razors off the surface
- Avoid scourers, wire wool and gritty cream cleaners
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. On site, it takes two to three hours for most chips in most cases. We leave the room clean.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, usually by the day after, the bath is ready to use.
How to prepare
- Move bottles, mats and clutter away from the area
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
Ask for a price
To get a price, send two or three pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Related advice
About Marford
Marford is about 3 miles north of Acton, in Wrexham. Whether you’re in the middle of Marford or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Marford is one of 115 places in Wrexham where we work. Our jobs stretch from Marford to Liverpool (21 miles away).
Here we cover the LL12 postcode area. You will find streets such as Beech Lane, Chester Road and Ridgeway Avenue. If you’re just outside Marford, we cover Burton (1 mile north), Greenfields (1 mile north-west), Rossett (1 mile north-east), Darland (1 mile north-east) and Trevalyn (1 mile east). We also work in nearby towns such as Wrexham (4 miles south), Caia Park (4 miles south), Offa (5 miles south-west), Rhosllannerchrugog (7 miles south-west), Rhosddu (4 miles south-west) and Acton (3 miles south).
Landmarks near Marford
Our clients here include homes close to Alyn Hotel, Presbyterian Chapel and Darland High School and the streets around them. Marford’s nearest station is Cefn-Y-Bedd station, about 3 miles west. Nearby you’ll also find Roft Motte (less than half a mile west) and Tŷ Pawb (3.9 miles south). The countryside around Marford includes The Flash and Wilderness Tip (Gresford).
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How we price bath repair
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- Any earlier repairs that need removing first
- How many items we do on one visit
- How many areas need work
- The type of damage
We charge the same wherever you are, so there is no premium for Marford. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
You can normally get a fixed quote without us visiting. To make it quick:
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Any details about the material
- A coin beside the damage so we can judge size
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Should you replace it?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- One visit for most repairs
- Repair technicians who travel to you, UK-wide
- No extra charge for your area
- Everything repaired in place
Take a look at our prices page or guide to resurfacing and replacement costs.
Your questions about bath repair in Marford
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Do you cover the entire of Wrexham?
Across the UK. Our prices are the same everywhere.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How do I get a price for bath repair in Marford?
Repairs from £95. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
What happens after I send photos?
We come back with a fixed price. There’s no obligation to book.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Also in Marford
About our accreditations · Every repair comes with a one-year guarantee.
