Wrexham · Wales
Bath chip & crack repair in Burton, Wrexham
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Burton. Free, fixed quotes from your photos.
- Repairs from £95
- Chips along the edge of the bath
- Scratches you can feel with a fingernail
Can I fix it myself?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
About our bath repair in Burton
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. Whether it’s a failed DIY repair that’s discoloured or lifting and snagging damage from a refit, we can normally put it right.
Every repair is covered by our one-year guarantee.
- Location
- Burton (LL12)
- County
- Wrexham
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
More services for Burton
Signs you need bath repair in Burton
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
It’s worth getting a quote if you see:
- Rust by the waste and overflow
- Chips along the edge of the bath
- Damage beneath the taps
- Cracks in an acrylic bath
What your quote should include
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
- How the room is protected while they work
- What happens if they find more damage
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a few hours, depending on the damage. We clean up when we are done and tell you when it’s ready to use.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
Getting a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Read more
Burton and nearby
Burton is about 4 miles north of Acton, in Wrexham. Anywhere in LL12, we carry out the work at your property. Burton is one of 115 towns and villages in Wrexham where we work. We work right across the region, from Burton to Liverpool (20 miles away).
We cover every part of LL12. From Llay Road, Burton Road and Station Road or anywhere nearby, a technician can come to you. If you are just outside Burton, we cover Greenfields (1 mile west), Marford (1 mile south), Rossett (1 mile east), Lavister (1 mile north-east) and Darland (1 mile east). Within a short drive, we also cover Wrexham (4 miles south), Caia Park (5 miles south), Offa (5 miles south), Rhosllannerchrugog (8 miles south-west), Rhosddu (4 miles south) and Acton (4 miles south).
Local landmarks in Burton
Around Burton, we work in homes near Alyn Hotel, St Peter's CIW Voluntary Controlled Primary School and Darland High School and the streets around them. The nearest railway station is Caergwrle station, roughly 3 miles west of the centre. A little further out are Roft Motte (0.8 miles south) and Broughton Shopping Park (4 miles north). Not far away are Wilderness Tip (Gresford) and The Flash.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
FAQs for Burton
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
What happens after I send photos?
You’ll get a fixed quote back, plus dates. You’re under no obligation.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
I tried a repair kit. Can you fix it?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
How to look after the repair
So the finish stays in good condition:
- Do not scrub with anything abrasive
- If an acrylic bath flexes, have its feet adjusted
- Rinse it down after each bath
- Get a dripping tap fixed promptly
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What affects the price in Burton
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- The size and number of damaged areas
- Doing more than one item at once
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
How to get a fixed quote
Phone photos are fine, there is no need for anything special. Ensure they show:
- The postcode, so we can plan the visit
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
What a repair can’t fix
It helps to know what we cannot do:
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Burton
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
