Derbyshire · England
Bath Repair in Mathersgrave
Local bath repair for Mathersgrave: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Chips on the rim or sides
- A chip where the taps sit
How to look after the repair
Looking after the surface is easy:
- Avoid scourers, wire wool and gritty cream cleaners
- Have new chips seen to early
- Clean with warm water and a mild detergent
- Rinse the bath after use, especially in hard water areas
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Bath repair in Mathersgrave, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. Whether it’s a cracked acrylic bath and chips under the taps, we can help.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Mathersgrave (DE55)
- Region
- Derbyshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow two to three hours for most chips from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
- Clear the area around the damage
How to get a price
For a price in Mathersgrave, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
When to call us in Mathersgrave
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
It’s worth getting a quote if you see:
- An old repair that has yellowed or come loose
- Chips caused by builders
- Chips on the rim or sides
- Cracks in an acrylic bath
Comparing quotes
- Is the price fixed, and does it include VAT?
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- Who will actually do the work
How we price bath repair
Prices start from £95. Each job gets its own fixed price. These are the things that affect it:
- Doing more than one item at once
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with nothing added on the day.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- A clear, close picture of the problem area
- Natural light rather than flash
- The material, if you know it
- A wider photo showing the whole bath
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Also near Mathersgrave
Other services in Mathersgrave
What we cannot put right
Before booking, it’s worth knowing the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
About Mathersgrave
Mathersgrave is about 4 miles south-west of Clay Cross, in Derbyshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Mathersgrave is one of 532 towns and villages in Derbyshire we cover. We work right across the region, from Mathersgrave to Manchester (about 39 miles away).
Jobs in DE55 are booked in the same way as anywhere else. From School Lane, Matlock Road and Whitecarr Lane or a nearby road, a technician can come to you. Neighbouring places we cover include Doehole (1 mile west), Brackenfield (1 mile east), Wessington (1 mile south-east), Wheatcroft (1 mile south-west) and Butterley (1 mile north-west). Within a short drive, we also cover Chesterfield (8 miles north), Ilkeston (12 miles south-east), Belper (7 miles south), Heanor (9 miles south-east), Dronfield (12 miles north) and Ripley (6 miles south-east).
Around Mathersgrave
We visit homes around Holy Trinity Church, Wessington Primary School and The Plough Inn And Attached Barn, among other places. For rail, the closest station is Whatstandwell station, about 3.4 miles south-west of the centre. Further afield, we also cover the area around Willersley Castle (4 miles west) and Clay Cross Hospital (3.8 miles north-east).
Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Why repair rather than replace?
People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Mathersgrave
- Rooms protected and left tidy
- Work done at your home or business
- We’ll tell you if it’s not worth repairing
- One-year guarantee on every repair
See our pricing and bath cost comparison.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Your questions about bath repair in Mathersgrave
How long does the repair take to cure?
Most baths can be used the next day. We will tell you the exact curing time when we finish.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will the repair show?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
What does bath repair cost?
Repairs from £95. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Derbyshire.
About our accreditations · Every repair comes with a one-year guarantee.
