Redcar and Cleveland · England
Bath Repair in Mickleby
Problem with your bath in Mickleby? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Chips on the rim or sides
- A cracked acrylic bath
Bath repair in Mickleby without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, typically in a single visit. Whether it’s scuffs and scratches in the surface and chips caused by builders, we can help, on whirlpool & spa baths, roll-top & freestanding and cast iron enamel alike.
Big or small, you get the same one-year guarantee in Mickleby and across Redcar and Cleveland.
- Location
- Mickleby (TS13)
- County
- Redcar and Cleveland
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
To keep it looking its best:
- Cover the bath during DIY or decorating
- Don’t leave a fresh chip for long
- Do not leave razors or cans standing in the bath
- Rinse the bath after use, especially in hard water areas
There is nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with nothing added on the day.
What you get with us
- Colour-matched on site
- Repair technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- Every repair guaranteed for a year
Take a look at our prices page and guide to resurfacing and replacement costs.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
Towns and villages near Mickleby
Other services in Mickleby
What we cannot put right
We would rather lose a job than do one that won’t last, so these are the limits:
- A steel bath rusted through
- Cracks in acrylic we cannot reach from underneath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes two to three hours for most chips. We clean up when we’re done and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the day after.
Before we arrive
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Read more
Work for landlords and builders
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
We work for landlords, letting agents and housing providers in Mickleby as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
About Mickleby
Mickleby is about 6 miles west of Whitby, in Redcar and Cleveland. Whether you are in the middle of Mickleby or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Mickleby is one of 48 towns and villages in Redcar and Cleveland we cover. Our jobs stretch from Mickleby to Newcastle upon Tyne (about 48 miles away).
Our technicians cover all of the TS13 postcode area and the streets around it. That includes homes on The Lane, Mickleby Lane and West Lane and the roads around them. Neighbouring places we cover include Ellerby (1 mile north), West Barnby (1 mile east), East Barnby (2 miles east), Newton Mulgrave (2 miles north-west) and Runswick Bay (2 miles north). Within a short drive, we also cover Redcar (14 miles north-west), Guisborough (12 miles west), Marske-by-the-Sea (12 miles north-west), Skelton-in-Cleveland (10 miles north-west), Skelton (10 miles north-west) and Brotton (8 miles north-west).
Around Mickleby
Mickleby’s nearest station is Lealholm station, roughly 4.1 miles south-west of the centre. Other landmarks nearby include Whitby Hospital (6 miles east) and Mulgrave Castle (2.5 miles east). The countryside around Mickleby includes Danby Beacon.
Your questions about bath repair in Mickleby
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Will the price change on the day?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
How long before I can use the bath?
Usually within a day, depending on the repair.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
Is a holed acrylic bath repairable?
In most cases. Send us a photo of the hole and one from under the bath if you can.
What does bath repair cost?
Repairs from £95. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your TS13 postcode.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
What bath repair costs
Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:
- The type of damage
- How hard the colour is to match
- The material and finish
- The size and number of damaged areas
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
How to get a fixed price
The better the photos, the more accurate the price. Here’s what we find most useful:
- A clear, close picture of the problem area
- Natural light rather than flash
- The postcode, so we can plan the visit
- A photo taken from further back
Most clients in Mickleby get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
