Gloucestershire · England
Bath chip & crack repair in Middleyard, Gloucestershire
Bath repair in Middleyard without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- A chip where the taps sit
- Cracks in an acrylic bath
When to call us in Middleyard
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Keep an eye out for these signs:
- Impact holes in acrylic
- A failed DIY repair that’s discoloured or lifting
- Rusty patches near the plughole
- Damage beneath the taps
Before booking anyone
- How to look after the finish
- How changes to the job are handled
- What protection goes down before work starts
- Who will actually do the work
How we handle bath repair in Middleyard
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. Typical jobs include a kit repair that didn’t last and impact holes in acrylic, on whirlpool & spa baths, acrylic and pressed steel enamel.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Middleyard (GL10)
- Region
- Gloucestershire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
If you manage property in Middleyard, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Also near Middleyard
Also in Middleyard
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Keep metal cans and razors off the surface
- Get a dripping tap fixed promptly
- Do not leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.
What we do, step by step
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the following day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
- Keep pets and children out of the room while we work
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
When we would advise against a repair
We will always be straight with you, so here’s what a repair will not do:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Repairing versus replacing in Middleyard
Replacing a bath rarely stops at the bath: tiles along the rim usually crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why us?
- A year’s guarantee on all work
- Nothing taken out or refitted
- We leave the room as we found it
- One price list for the whole UK
Read our full price list and guide to resurfacing and replacement costs.
Common questions in Middleyard
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Do you cover Middleyard?
Yes, we do. We send a technician to Middleyard for every job, and the price is the same as everywhere else.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can a cracked acrylic bath be fixed?
Normally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Our work in Middleyard
Middleyard is about 2 miles south-west of Stroud, in Gloucestershire. Clients in Middleyard get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We cover 470 places in Gloucestershire, from the larger towns to small villages. Our jobs stretch from Middleyard to Birmingham (about 54 miles away).
Our visits in GL10 work the same way as everywhere else we cover. Streets in the area include Daffodil Leaze, Coldwell and Penn Lane, all of which we cover. Neighbouring places we cover include King's Stanley (1 mile north-west), Leonard Stanley (1 mile west), Selsley (1 mile north-east), Ryeford (1 mile north) and Ebley (1 mile north-east). Larger places within reach include Cheltenham (14 miles north-east), Gloucester (9 miles north), St Paul's (14 miles north-east), Cirencester (13 miles east), Lansdown (14 miles north-east) and Fairview (15 miles north-east).
Local landmarks in Middleyard
In Middleyard, that means homes near Selsley Church, King's Stanley CofE Primary School and Five Acre Grove. You will also find The Kings Head pub (0.5 miles north-west) and Marling School (1.8 miles north-east). For rail, the closest station is Stonehouse station, roughly 1.5 miles north-west of the centre. Further afield, we also cover the area around Dunkirk Mill Museum (2.3 miles south-east) and Standish Hospital (2.3 miles north). Open spaces near Middleyard include Woodchester Park and Coaley Peak.
About our accreditations · Every repair comes with a one-year guarantee.
