Gloucestershire · England
Bath Repair for Selsley homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Selsley. Free, fixed quotes from your photos.
- Repairs from £95
- Hairline or through cracks in acrylic
- Damage beneath the taps
About our bath repair in Selsley
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. Common call-outs are for scuffs and scratches in the surface and an old repair that has yellowed or come loose, in acrylic, roll-top & freestanding and pressed steel enamel.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Selsley (GL5)
- Region
- Gloucestershire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Prices start from £95. There’s no charge for travel to Selsley. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Send pictures for a quote
Two or three clear photos are generally enough. It helps if you send:
- Any earlier repairs or coatings
- A wider photo showing the whole bath
- One sharp close-up of the damage
- Where you are, by postcode
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Common questions in Selsley
Will I be able to see the repair?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Nearby places to Selsley
What else we do in Selsley
Keeping it looking good
Aftercare is simple:
- Store metal items away from the bath
- Give the bath a quick rinse after use
- Clean with warm water and a mild detergent
- Cover the bath during DIY or decorating
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Should you replace it?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Most jobs done in one visit
- Every repair guaranteed for a year
- Work done at your home or business
- Straight answers about what a repair can do
Read our full price list or resurfacing vs replacement cost guide.
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to a few hours, depending on the damage, tidy-up included.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the next day, the bath is ready to use.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Selsley and nearby
Selsley is about 1 mile south-west of Stroud, in Gloucestershire. Anywhere in GL5, we carry out the work at your property. Our technicians cover all 470 towns and villages across Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 53 miles away.
All of GL5 is within our area, from the main roads to the quietest streets. Local streets include Selsley Hill, Pooles Lane and New Road. Other places close to Selsley include Dudbridge (1 mile north), Cainscross (1 mile north), Ebley (1 mile north-west), Woodchester (1 mile south-east) and Rodborough (1 mile north-east). Larger places within reach include Cheltenham (13 miles north-east), Gloucester (8 miles north), St Paul's (14 miles north-east), Cirencester (12 miles east), Lansdown (13 miles north-east) and Fairview (14 miles north-east).
Around Selsley
Our customers here include homes close to Gastrells Community Primary School, Selsley Church and The Bridge Inn and the streets around them. Also close by are Marling School (1 mile north) and Stratford Park (1.5 miles north-east). The nearest railway station is Stroud station, about 1.3 miles north-east of the centre. Well-known places in the area include Harescombe Castle (4.2 miles north) and Stratford Park (1.5 miles north-east). Green spaces nearby include Coaley Peak and Frome Banks.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Selsley
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
