Aberdeenshire · Scotland
Bath Repair for Midmar homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Midmar. Send pictures for a free, fixed quote.
- Repairs from £95
- Chips on the rim or sides
- Rusty patches near the plughole
Your questions about bath repair in Midmar
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Something went through my bath. Can it be fixed?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens after I send pictures?
We review the photos and send a fixed quote and the next dates we have.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Bath repair in Midmar, done in place
A damaged bath does not have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site. Common call-outs are for snagging damage from a refit and a cracked acrylic bath, across roll-top & freestanding, cast iron enamel and whirlpool & spa baths.
All our work comes with a one-year guarantee.
- Area
- Midmar (AB51)
- Area hub
- Aberdeenshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also in Midmar
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take a few hours, and you’re welcome to carry on with your day while we work.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, typically by the following day, the bath is ready to use.
Preparing for the visit
- Keep a parking space free if you can
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Ask for a price
Most customers in Midmar get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
What affects the price in Midmar
Prices start from £95. There is no charge for travel to Midmar. The price depends on:
- How much damage there is
- The type of damage
- Doing more than one item at once
- Previous DIY repairs that have to come out
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- A coin or ruler next to the damage for scale
- A picture taken from further back
- One sharp close-up of the damage
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
What a repair cannot fix
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we cannot get to from below
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we’ll say what we think.
What we work on
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Signs you need bath repair in Midmar
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
If you can see any of these, send us a photo:
- Impact holes in acrylic
- Snagging damage from a refit
- Scuffs and scratches in the surface
- A chipped rim or side
Comparing quotes
- How long the guarantee is and what it covers
- Whether they match the colour on site
- What preparation is included
- If travel is included in the price
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Don’t leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath does not move when you stand in it
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Repairing versus replacing in Midmar
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why us?
- One price list for the whole UK
- Colour-matched on site
- No need to remove anything
- Dust sheets down, tidy finish
Take a look at our prices page or guide to resurfacing and replacement costs.
Covering Midmar
Midmar is about 10 miles south-west of Inverurie, in Aberdeenshire. Anywhere in AB51, we carry out the work at your property. We cover all 161 towns and villages across Aberdeenshire.
Our visits in AB51 are booked in the same way as anywhere else. Other places close to Midmar include Sauchen (2 miles north-east), Echt (4 miles east), Dunecht (4 miles east), Monymusk (5 miles north) and Kirkton of Tough (5 miles north-west). Within a short drive, we also cover Inverurie (10 miles north-east), Westhill (9 miles east), Banchory (7 miles south), Garioch (10 miles north-east), Kemnay (6 miles north-east) and Kintore (8 miles north-east). If you are somewhere remote, call first so we can plan the visit.
Landmarks near Midmar
Well-known places in the area include Midmar Castle (2.1 miles south-east). Not far away are Hill of Fare.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
