Wiltshire · England
Bath Repair in Minety Common
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Minety Common and across Wiltshire. Send photos for a free, fixed quote.
- Repairs from £95
- A chip where the taps sit
- Scuffs and scratches in the surface
Bath repair in Minety Common without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour-matched so it blends in. We work on pressed steel enamel, cast iron enamel and acrylic, and people most frequently call us about chips caused by builders and a chipped rim or side.
All our work is covered by a one-year guarantee.
- Location
- Minety Common (SN16)
- County
- Wiltshire
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- How many items we do on one visit
- The material and finish
- Whether old repairs or coatings need taking off
- How many areas need work
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
You can take the photos on your phone. Make sure they show:
- Natural light rather than flash
- Something in shot to show the size
- Your postcode, so we can check dates
- What it’s made of, if you know
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Clean with warm water and a mild detergent
- If an acrylic bath flexes, have its feet adjusted
- Have new chips seen to early
- A dripping tap stains enamel, so fix it early
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Your questions about bath repair in Minety Common
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
What about rust by the waste?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Nearby places to Minety Common
Also in Minety Common
Work for landlords and builders
If you manage property in Minety Common, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes two to three hours for most chips. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Let us know about parking or access
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
Signs you need bath repair in Minety Common
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
If you can see any of these, send us a picture:
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
- A chipped rim or side
- Scratches you can feel with a fingernail
Before you book anyone
- How changes to the job are handled
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
Covering Minety Common
Minety Common is about 7 miles north-west of Swindon, in Wiltshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Minety Common is one of 425 places in Wiltshire where we work. Our nearest city page is Birmingham, about 60 miles away.
Our repair technicians cover all of SN16. We also cover the places around Minety Common: Minety (1 mile north-west), Lower Moor (2 miles north-west), Brandier (2 miles north-west), Upper Minety (2 miles north-west) and Leigh (2 miles north-east). Within a short drive, we also cover Chippenham (13 miles south-west), Calne (12 miles south), Malmesbury (7 miles west), Hardenhuish (12 miles south-west), Lyneham (7 miles south) and Pewsham (12 miles south-west).
Near you in Minety Common
Our customers here include homes close to Minety Church of England Primary School. Well-known places in the area include Purton Museum (3.7 miles east) and Ashton Keynes Castle (3.2 miles north). Open spaces near Minety Common include Clattinger Farm.
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book.
Why choose Surface Doctor in Minety Common
- Rooms protected and left tidy
- Everything repaired in place
- We come to you, anywhere in the UK
- One price list for the entire UK
Take a look at our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
