Wiltshire · England
Bath Repair for Minety homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Minety, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips on the rim or sides
- Rusty patches near the plughole

When a repair isn’t the answer
In fairness, there are a few things a repair won’t fix:
- Metal that has corroded all the way through
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Minety
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
About our bath repair in Minety
Most of our bath repairs take a few hours, and the bath is back in use the day after. You won’t need a plumber or tiler, because nothing is disconnected. We work on cast iron enamel, acrylic and pressed steel enamel, and the jobs we see most are a kit repair that didn’t last and holes from dropped items.
You get a one-year guarantee, the same in Minety as everywhere else we work.

- Area
- Minety (SN16)
- Region
- Wiltshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
More services for Minety
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Minety and the surrounding area
Minety is about 7 miles south of Cirencester, in Wiltshire. Wherever you are in the SN16 postcode area, we come to you. We work in all 425 towns and villages across Wiltshire, from the larger towns to small villages. Our jobs stretch from Minety to Birmingham (59 miles away).
All of SN16 is covered, from the main roads to the quietest streets. From Station Road, Silver Street and Oakleaze or a nearby road, we can come to you. Neighbouring places we cover include Lower Moor (1 mile north-west), Minety Common (1 mile south-east), Brandier (1 mile north-west), Upper Minety (1 mile west) and Leigh (2 miles north-east). Within a short drive, we also cover Chippenham (13 miles south-west), Calne (12 miles south), Malmesbury (6 miles west), Hardenhuish (13 miles south-west), Lyneham (7 miles south) and Pewsham (13 miles south-west).
Landmarks near Minety
We visit homes around Church of St Leonard and Minety Church of England Primary School, among other places. A little further out are Ashton Keynes Castle (2.7 miles north-east). The countryside around Minety includes Clattinger Farm.
Signs you need bath repair in Minety
A cracked acrylic bath usually wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
It’s worth getting a quote if you see:
- A failed DIY repair that is discoloured or lifting
- A hole punched through by something heavy
- Deep scratches in acrylic
- Snagging damage from a refit
Before you book anyone
- How long it needs to cure
- The length of the guarantee and what it covers
- What protection goes down before work starts
- What happens if they find more damage
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- A fixed quote before you book
- Nothing taken out or refitted
- Honest advice, even when it means no job
- One-year guarantee on every repair
Read our prices page and bath cost comparison.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
- Clear the area around the damage
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
How to care for the repair
To keep it looking its best:
- Do not leave razors or cans standing in the bath
- Ensure an acrylic bath is firm underfoot
- Put a towel in the bath if you are working above it
- Clean with warm water and a mild detergent
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Landlords, agents and businesses in Minety
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Common questions in Minety
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How invisible is a bath repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Can you repair something that’s been repaired before?
Generally, yes. The old repair comes out first, so mention it when you send pictures.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
About our accreditations · Every repair comes with a one-year guarantee.

