Hampshire · England
Bath Repair in Monkwood
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Monkwood. Free, fixed quotes from your photos.
- Repairs from £95
- A chip where the taps sit
- Cracks in an acrylic bath
Bath repair in Monkwood without replacing anything
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. Typical jobs include rust spots around the plughole and a chipped rim or side, across pressed steel enamel, roll-top & freestanding and acrylic.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Monkwood (SO24)
- Region
- Hampshire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Monkwood
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Look out for these signs:
- A chipped rim or side
- Damage done while the bathroom was being fitted
- A kit repair that didn’t last
- Deep scratches in acrylic
Before booking anyone
- How the room is protected while they work
- What happens if they find more damage
- What preparation is included
- A fixed quote, and whether VAT is included
Monkwood questions
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Let us know about parking or access
- Ensure the room can be ventilated
- Tell us if there are stairs or a lift
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Read more
What affects the price in Monkwood
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- The material and finish
- Doing more than one item at once
- Access to the area
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
Most quotes are done from pictures alone. To make it quick:
- Any details about the material
- A wider photo showing the entire bath
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
Our work in Monkwood
Monkwood is about 6 miles south-west of Alton, in Hampshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We cover 683 places in Hampshire. We work right across the region, from Monkwood to London (about 51 miles away).
All of SO24 is within our area, from the main roads to the quietest streets. From Hill Farm Road, Flint Fields and Soame's Lane or anywhere nearby, we can come to you. We also cover the places around Monkwood: Charlwood (1 mile north-east), West Tisted (1 mile south-west), Gilbert Street (1 mile north-west), Kitwood (2 miles north) and Ropley (2 miles north-west). Within a short drive, we also cover Basingstoke (14 miles north), Winchester (12 miles west), Havant (15 miles south), Eastleigh (15 miles south-west), Horndean (11 miles south) and Alton (6 miles north-east).
What’s near Monkwood
Around Monkwood, we work in homes near Monkwood Mission Church. Nearby you’ll also find Alton Community Hospital (5.5 miles north-east). Open spaces near Monkwood include Red Hill and Shutts Copse.
Places near Monkwood
More services for Monkwood
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why choose Surface Doctor in Monkwood
- Colours mixed by hand to suit your surface
- Free fixed quotes from pictures
- Rooms protected and left tidy
- A year’s guarantee on all work
See our pricing or bath cost comparison.
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- Cracks in parts of an acrylic bath we can’t get to from below
- Flexing caused by a failed cradle or loose feet
- Wear across the whole surface, which needs re-enamelling
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Keeping it looking good
So the finish stays in good condition for years:
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Put a towel in the bath if you’re working above it
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
