Carmarthenshire · Wales
Bath chip & crack repair in Morfa, Carmarthenshire
We travel to Morfa for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Holes from dropped items
- A chip where the taps sit
How we handle bath repair in Morfa
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour matched so it blends in. We regularly repair roll-top & freestanding, acrylic and cast iron enamel, and the jobs we see most are deep scratches in acrylic and chips caused by builders.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Location
- Morfa (SA15, SA14)
- County
- Carmarthenshire
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
- Let us know about parking or access
How to get a price
If you are in Morfa and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
Landlord and trade work in Morfa
Landlords, letting agents and housing providers in Morfa use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
For anyone letting property in or around Morfa, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
What bath repair costs
Repairs from £95. There is no charge for travel to Morfa. The price depends on:
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- The size and number of damaged areas
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your photos
You can generally get a fixed quote without us visiting. To make it quick:
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Natural light rather than flash
- Where you are, by postcode
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
How to look after the repair
Simple care helps the repair last. Our advice:
- Clean with warm water and a mild detergent
- Have new chips seen to early
- Don’t scrub with anything abrasive
- Store metal items away from the bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Morfa questions
What about rust by the waste?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
What happens next?
You will get a fixed quote back, plus dates. You’re under no obligation.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Repairing versus replacing in Morfa
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Dust sheets down, tidy finish
- One-year guarantee on every repair
- No need to remove anything
- Colour-matched on site
Take a look at our full price list and guide to resurfacing and replacement costs.
Also in Morfa
Our work in Morfa
Morfa is about 1 mile south of Bigyn, in Carmarthenshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover all 195 towns and villages across Carmarthenshire, from the larger towns to small villages.
Here we cover the SA15 and SA14 postcode area. That includes homes on The Avenue, Burry Road and Dolau Road and the roads around them. We also travel to Trostre (1 mile north-east), Pen-y-fan (1 mile north), Bigyn (1 mile north), Machynys (1 mile south-west) and Wern (1 mile north-west). Further out, we also cover Carmarthen (15 miles north-west), Ammanford (11 miles north-east), Burry Port (5 miles west), Betws (11 miles north-east), Pembrey and Burry Port Town (5 miles west) and Achddu (5 miles west).
Around Morfa
Typical jobs here are in homes near Morfa Christ Church, Maes Y Morfa Community Primary School and Coedcae School, among other places. Nearby too are St. John Lloyd (1.4 miles north) and The Golfers Inn (within half a mile west). Morfa’s nearest station is Llanelli station, about 0.8 miles north-west of the centre. Nearby you will also find Llanelli New Castle (1.3 miles north-west) and Prince Philip Hospital (1.7 miles north). Green spaces nearby include Bryn Harddfan and Broad Pool.
About our accreditations · Every repair comes with a one-year guarantee.
