York · England

Bath chip & crack repair in Naburn, York

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Naburn and across York. Send photos for a free, fixed quote.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Naburn

How we handle bath repair in Naburn

Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Our repair technicians work on pressed steel enamel, whirlpool & spa baths and acrylic, and common reasons people contact us are scuffs and scratches in the surface and chips caused by builders.

A one-year guarantee comes as standard, so you are not left on your own once we have gone.

Location
Naburn (YO19)
County
York
Cover
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

What a repair cannot fix

We won’t take on work that won’t last, so these are the limits:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • Wear across the entire surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Naburn

  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding

Can I fix it myself?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.

Naburn: your questions answered

Can you repair a hole in a bath?

In most cases. Photos of the hole and the underside help us check.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we will take it from there.

Can you repair something that’s been repaired before?

Most of the time. Let us know what was used before.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders in Naburn.

What does bath repair cost?

Repairs from £95. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item with your YO19 postcode.

Will the price change on the day?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

How invisible is a bath repair?

We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Mention it when you send pictures.

Keeping it looking good

A little care keeps the finish looking good. We recommend:

  • Clean with warm water and a mild detergent
  • Have new chips seen to early
  • Make sure an acrylic bath is firm underfoot
  • Keep metal cans and razors off the surface

Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

Work for landlords and builders

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

For anyone letting property in or around Naburn, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.

Repair or replace in Naburn?

Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Naburn

  • Typically one visit, start to finish
  • Dust sheets down, tidy finish
  • One price list for the whole UK
  • We’ll tell you if it’s not worth repairing

Take a look at our pricing and bath cost comparison.

What affects the price in Naburn

Prices start from £95. We price every job individually. The main factors are:

  • What the surface is made of
  • Whether old repairs or coatings need taking off
  • Where the damage is and how we get to it
  • The type of damage

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.

Quotes from your photos

We price nearly every job from photos. This is what to send:

  • Details of any past repairs
  • One picture of the whole bath
  • What it’s made of, if you know
  • Something in shot to show the size

Email us pictures of the damage and a wider shot of the entire item, and tell us you’re in Naburn, and we will reply with a fixed price.

What happens on the day

We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a few hours, depending on the damage for most jobs. We leave the room clean.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Tell us if there are stairs or a lift
  • Make sure the room can be ventilated

Get a quote

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.

Get a fixed price

Advice

Where we work around Naburn

Naburn is about 4 miles south of York, in York. Our technicians come to clients in Naburn and nearby villages, so nothing has to leave your home. We cover 79 places across York, from the larger towns to small villages. You can also see our page for Leeds, about 20 miles away.

Jobs in YO19 work the same way as everywhere else we cover. We regularly work on streets such as Main Street, York Road and Ferry Farm Close. If you’re just outside Naburn, we cover Bishopthorpe (1 mile north), Crockey Hill (2 miles east), Middlethorpe (2 miles north), Fulford (3 miles north) and South Bank (3 miles north). Within a short drive, we also cover York (4 miles north), Clementhorpe (3 miles north), Bishophill (4 miles north), Hungate (4 miles north), Clifton (5 miles north) and Tang Hall (4 miles north).

Near you in Naburn

Typical jobs here are in homes near Church of Saint Matthew, The Blacksmiths Arms and Naburn Church of England Primary School. The closest station to Naburn is York station, roughly 3.8 miles north of the centre. A little further out are Middlethorpe Without (2 miles north) and Naburn Hospital (1.2 miles north). The countryside around Naburn includes Siward's Howe.

Map of Naburn © OpenStreetMap contributors

Signs you need bath repair in Naburn

Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.

It’s worth getting a quote if you see:

  • Scratches you can feel with a fingernail
  • An old repair that has yellowed or come loose
  • Snagging damage from a refit
  • Chips under the taps

What to look for in a quote

  • How to look after the finish
  • Whether they match the colour on site
  • What protection goes down before work starts
  • How soon you can use it again

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.