Flintshire · England
Bath Repair in Nannerch
Bath repair in and around Nannerch: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- Chips caused by builders
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Nannerch, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
How we handle bath repair in Nannerch
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We’re often asked to fix rust by the waste and overflow and cracks in an acrylic bath, in pressed steel enamel, roll-top & freestanding and acrylic.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Nannerch (CH7)
- Region
- Flintshire
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a morning or an afternoon.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Open a window if you can
- Let us know if it has been repaired before
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Related advice
About Nannerch
Nannerch is about 5 miles west of Flint, in Flintshire. Jobs in Nannerch are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Nannerch is one of 139 places in Flintshire where we work. You can also see our page for Liverpool, about 19 miles away.
Here we cover the CH7 postcode area. Local streets include Pen-y-Coed, Village Road and Bryn Celyn, all of which we cover. Nearby, we also work in Licswm (1 mile north), Ysceifiog (2 miles north-west), Babell (2 miles north-west), Pentre Halkyn (3 miles north-east) and Brynffordd (3 miles north). We also work in nearby towns such as Connah's Quay (8 miles east), Buckley (7 miles south-east), Bwcle (8 miles south-east), Flint (5 miles east), Saltney (14 miles east) and Mold (6 miles south-east).
Around Nannerch
In Nannerch, that means homes near Church Of St Michael And All Angels, Nannerch Primary School and The Cross Foxes pub, among other places. A little further out are Castell Placename (1.3 miles north-east) and Lluesty Hospital (3.8 miles north). For a walk, there’s Bryn Golau and Moel Dywyll.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Nannerch. The price reflects:
- Whether old repairs or coatings need taking off
- The type of damage
- Where the damage is and how we get to it
- What the surface is made of
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send pictures for a quote
It only takes a minute to photograph the damage. Try to send:
- One picture of the entire bath
- Details of any past repairs
- Daylight if possible, and no flash reflection
- Where you are, by postcode
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
How to care for the repair
So the finish stays in good condition for years:
- Get any new chip repaired before it rusts
- Put a towel in the bath if you are working above it
- Check that an acrylic bath does not move when you stand in it
- A dripping tap stains enamel, so fix it early
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Nannerch: your questions answered
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you cover the entire of Flintshire?
The entire UK, including all of Flintshire. Send your postcode with your photos and we will confirm dates.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Is a cracked acrylic bath repairable?
Normally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Towns and villages near Nannerch
What else we do in Nannerch
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. We charge the same wherever you are, with no extra for Nannerch. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Nannerch
- Most jobs done in one visit
- Technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
Take a look at our full price list and guide to resurfacing and replacement costs.
Common problems we fix in Nannerch
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.
Most people get in touch when they notice one of these:
- A kit repair that didn’t last
- Snagging damage from a refit
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
Before booking anyone
- How soon you can use it again
- Who will actually do the work
- How long the guarantee is and what it covers
- A fixed quote, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.
