Bridgend · Wales
Bath Repair for Nant-y-moel homes
Our technicians come to Nant-y-moel for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- A hole punched through by something heavy
What affects the price in Nant-y-moel
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- Doing more than one item at once
- How easy the damage is to reach
- How hard the colour is to match
- The material
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- One picture of the whole bath
- The postcode, so we can plan the visit
- Natural light rather than flash
- Something in shot to show the size
If you are in Nant-y-moel and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
About our bath repair in Nant-y-moel
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We regularly repair acrylic, whirlpool & spa baths and pressed steel enamel, and the jobs we see most are rust by the waste and overflow and deep scratches in acrylic.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Where
- Nant-y-moel (CF32)
- County
- Bridgend
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Nant-y-moel
More services for Nant-y-moel
For landlords and businesses
If you manage property in Nant-y-moel, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Get any new chip repaired before it rusts
- Stick to mild cleaners and a soft cloth
- Protect the bath with a towel when doing jobs nearby
- Give the bath a quick rinse after use
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaking fittings, which need a plumber
- Wear across the whole surface, which needs re-enamelling
- Acrylic cracks with no access behind them
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Where we work around Nant-y-moel
Nant-y-moel is about 3 miles south-west of Rhondda, in Bridgend. Jobs in Nant-y-moel are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover 91 places in Bridgend.
All of CF32 is within our area. Streets in the area include Station Road, Chapel Street and Dinam Street, and we cover them all. With the A4061 close by, Nant-y-moel is simple for us to get to. Close by, we cover Price Town (1 mile south), Wyndham (1 mile south), Ogmore Vale (2 miles south), Pontycymer (2 miles south-west) and Blaengarw (2 miles west). Within a short drive, we also cover Bridgend (8 miles south), Maesteg (5 miles west), Porthcawl (12 miles south-west), Newcastle Higher (8 miles south), Ynysawdre (6 miles south-west) and Pencoed (7 miles south).
Landmarks near Nant-y-moel
We visit homes around Nantymoel Hotel, Nantymoel Primary School and St David's Church, among other places. The closest station to Nant-y-moel is Treorchy station, about 2.8 miles north-east. Other landmarks nearby include Moel Garn (1.6 miles south-west) and Llwynypia Hospital (4 miles east). Green spaces nearby include Ferndale Lake and Mynydd Ton.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Questions from Nant-y-moel
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
I tried a repair kit. Can you fix it?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
When to call us in Nant-y-moel
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.
People generally call us when they notice something like this:
- Rust by the waste and overflow
- A chip where the taps sit
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
What to look for in a quote
- How the colour is matched
- Aftercare advice
- How the room is protected while they work
- If travel is included in the price
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
What we do, step by step
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take a few hours, depending on the damage, and you can get on with other things while we’re there.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the day after.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
Getting a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
