Conwy · Wales
Bath Repair for Nantyfelin homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Nantyfelin and across Conwy. Send photos for a free, fixed quote.
- Repairs from £95
- Hairline or through cracks in acrylic
- Scuffs and scratches in the surface
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
- Fix dripping taps early to stop staining and limescale
- Have new chips seen to early
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
About our bath repair in Nantyfelin
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, usually in a single visit. We’re often asked to fix chips under the taps and scratches you can feel with a fingernail, on cast iron enamel, whirlpool & spa baths and roll-top & freestanding.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Nantyfelin (LL33)
- Region
- Conwy
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
We will not take on work that will not last, so these are the limits:
- Cracks in acrylic we can’t reach from underneath
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we will give you a straight answer.
What we work on
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Repairing versus replacing in Nantyfelin
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why choose Surface Doctor in Nantyfelin
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
- Fixed prices from your pictures
Take a look at our pricing and guide to resurfacing and replacement costs.
How we price bath repair
Repairs from £95. We price every job individually. The main factors are:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How many items we do on one visit
- The material
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- Any details about the material
- One sharp close-up of the damage
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Places near Nantyfelin
What else we do in Nantyfelin
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Our work in Nantyfelin
Nantyfelin is about 7 miles east of Bangor, in Conwy. Jobs in Nantyfelin are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Nantyfelin is one of 75 towns and villages in Conwy where we work. You can also see our page for Liverpool, about 44 miles away.
Our visits in LL33 work the same way as everywhere else we cover. That includes homes on Park Road, Aber Road and Bryn Road. If you are just outside Nantyfelin, we cover Pentre Uchaf (1 mile north-west), Nantypandy (1 mile east), Llanfairfechan (1 mile north), Penmaenan (2 miles north-east) and Pen-y-coed (2 miles north-east). Further out, we also cover Bae Colwyn (10 miles east), Llandudno (8 miles north-east), Old Colwyn (11 miles east), Colwyn Bay (12 miles east), Colwyn Bay (10 miles east) and Conwy (7 miles north-east).
Around Nantyfelin
In Nantyfelin, that means homes near Parish Church of St Mary, St Winifred's School and Virginia Inn. For rail, the closest station is Llanfairfechan station, about 0.8 miles north-west. Further afield, we also cover the area around Penmaenmawr Museum (2.5 miles north-east) and Braich y Dinas (0.9 miles east). Not far away are Penmaen Mawr and Spinnies Nature Reserve.
The process
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on the damage, and we finish with a tidy-up and a look at the finished work together.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Make sure the area is dry
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
Landlord and trade work in Nantyfelin
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Nantyfelin: your questions answered
Do you work in Nantyfelin?
We do. Technicians travel to Nantyfelin from across the region, with no extra charge for travel.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
It’s been repaired before. Can you still fix it?
Generally, yes. The old repair comes out first.
About our accreditations · Every repair comes with a one-year guarantee.
