Conwy · Wales
Bath Repair for Nantypandy homes
Bath repair in and around Nantypandy: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Snagging damage from a refit
- A cracked acrylic bath
Repair or replace in Nantypandy?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Typically one visit, start to finish
- A fixed quote before booking
- One-year guarantee on every repair
- Everything repaired in place
Take a look at our prices page and resurfacing vs replacement cost guide.
How we handle bath repair in Nantypandy
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. If you are dealing with holes from dropped items and hairline or through cracks in acrylic, we can help, on roll-top & freestanding, cast iron enamel and whirlpool & spa baths alike.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- Nantypandy (LL33)
- Region
- Conwy
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Nantypandy
Prices start from £95. Prices are worked out job by job. What matters most is:
- What kind of damage it is
- How easy the damage is to reach
- Doing more than one item at once
- The colour and finish to match
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- Details of any past repairs
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Also near Nantypandy
What else we do in Nantypandy
Honest limits
Some jobs are not right for a repair, including:
- Metal that has corroded all the way through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Nantypandy
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
About Nantypandy
Nantypandy is about 7 miles east of Bangor, in Conwy. Wherever you are in the LL33 postcode area, a technician comes to you. We work in all 75 towns and villages across Conwy, from the larger towns to small villages. Our nearest city page is Liverpool, about 44 miles away.
We work across LL33. We regularly work on streets such as Bryn Road, Mill Road and Mount Road and the roads around them. We also cover the places around Nantypandy: Nantyfelin (1 mile west), Pentre Uchaf (1 mile west), Llanfairfechan (1 mile north-west), Penmaenan (2 miles north-east) and Pen-y-coed (2 miles north-east). Further out, we also cover Bae Colwyn (10 miles east), Llandudno (7 miles north-east), Old Colwyn (11 miles east), Colwyn Bay (11 miles east), Colwyn Bay (10 miles east) and Conwy (6 miles north-east).
Near you in Nantypandy
Our customers here include homes close to Virginia Inn, Horeb Church and St Winifred's School. For rail, the closest station is Llanfairfechan station, roughly 1 mile north-west of the centre. Well-known places in the area include Penmaenmawr Museum (2.3 miles north-east) and Bryn y Neuadd Hospital (0.9 miles north-west). Green spaces nearby include Spinnies Nature Reserve and Llyn Anafon.
Aftercare tips
After the repair has cured, a few habits help it last:
- Cover the bath during DIY or decorating
- Get any new chip repaired before it rusts
- Get a dripping tap fixed promptly
- Give the bath a quick rinse after use
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Landlords, agents and businesses in Nantypandy
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
What happens on the day
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a few hours. We leave the room clean and ready to use once it has cured.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Open a window if you can
- Tell us about parking, stairs or access
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Questions from Nantypandy
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
How long does the repair take to cure?
Most baths can be used the day after. We’ll tell you the exact curing time when we finish.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Something went through my bath. Can it be fixed?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Signs you need bath repair in Nantypandy
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Contact us if you’ve noticed:
- A cracked acrylic bath
- Chips under the taps
- Chips on the rim or sides
- Rust by the waste and overflow
Before booking anyone
- How soon you can use it again
- How long the guarantee is and what it covers
- How the room is protected while they work
- Whether the price is fixed and includes VAT
About our accreditations · Every repair comes with a one-year guarantee.
