Telford and Wrekin · England
Bath chip & crack repair in Nash, Telford and Wrekin
Bath repair in and around Nash: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- Deep scratches in acrylic
Bath repair at your home in Nash
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. Typical jobs include rust by the waste and overflow and impact holes in acrylic, across whirlpool & spa baths, acrylic and pressed steel enamel.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Nash (TF6)
- Area hub
- Telford and Wrekin
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
What happens on the day
You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a few hours, depending on the damage, and you can get on with other things while we are there.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Related advice
What bath repair costs
Repairs from £95. You’ll know the full cost before you book. We look at:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- The material and finish
- Where the damage is and how we get to it
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what helps:
- Something in shot to show the size
- A close-up of the damage, in focus
- Any details about the material
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Repairing versus replacing in Nash
Swapping a damaged bath for a new one generally means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in a single visit. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why book with us
- We’ll tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
- Fixed prices from your photos
See our pricing or resurfacing vs replacement cost guide.
Also in Nash
FAQs for Nash
What areas do you cover?
The entire UK, including all of Telford and Wrekin. Just include your postcode and we’ll confirm dates.
Can you quote from pictures?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Will I be able to see the repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.
Signs you need bath repair in Nash
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Send us a picture if you notice any of these:
- An old repair that has yellowed or come loose
- Chips caused by builders
- Chips on the rim or sides
- Cracks in an acrylic bath
Comparing quotes
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
- How soon you can use it again
What we cannot put right
Before you book, it’s worth knowing the limits too:
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
- Cracks in acrylic we can’t reach from underneath
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Nash
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Our work in Nash
Nash is about 2 miles west of Wellington, in Telford and Wrekin. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Nash is one of 79 towns and villages in Telford and Wrekin where we work. Our nearest city page is Birmingham, about 32 miles away.
Jobs in TF6 are booked in the same way as anywhere else. Nearby, we also work in Cluddley (1 mile south-east), Little Wenlock (3 miles south-east), Garmston (3 miles south), Eaton Constantine (3 miles south-west) and Coalmoor (3 miles south-east). Larger places within reach include Telford (4 miles east), Dawley (4 miles south-east), Oakengates (4 miles east), Newport (9 miles north-east), The Rock (4 miles east) and Newdale (3 miles east).
Landmarks near Nash
Our customers here include homes close to Ercall Wood Academy and Church of St Peter and the streets around them. Nash’s nearest station is Wellington (Shropshire) station, roughly 1.6 miles east of the centre. Other landmarks nearby include Princess Royal Hospital (2 miles north-east) and Charlton Castle (1.9 miles west). Green spaces nearby include The Ercall.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
We work for landlords, letting agents and housing providers in Nash as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
