Wiltshire · England
Bath chip & crack repair in Coombe, Wiltshire
Bath repair across Coombe and nearby, usually in one visit.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips on the rim or sides
Bath repair in Coombe, done in place
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. We work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and common reasons people get in touch are a chipped rim or side and rusty patches near the plughole.
All our work is covered by a one-year guarantee.
- Location
- Coombe (SN9)
- Region
- Wiltshire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Coombe. The price reflects:
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Access to the area
- How much damage there is
Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- The postcode, so we can plan the visit
- One picture of the entire bath
- Details of any past repairs
- Natural light rather than flash
If you’re in Coombe and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Repairing versus replacing in Coombe
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. We charge the same wherever you are, so there is no premium for Coombe. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- We come to you, anywhere in the UK
- No extra charge for your area
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
Read our full price list and bath cost comparison.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
How to look after the repair
It’s all simple stuff:
- Don’t scrub with anything abrasive
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get any new chip repaired before it rusts
- Rinse it down after each bath
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
When to call us in Coombe
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.
Customers typically contact us about:
- Hairline or through cracks in acrylic
- Rust spots around the plughole
- Impact holes in acrylic
- A chipped rim or side
Comparing quotes
- Whether the colour is mixed to match
- Whether the price covers travel
- Whether a trained technician does the job
- How the room is protected while they work
Coombe and nearby
Coombe is about 6 miles north of Amesbury, in Wiltshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Coombe is one of 425 towns and villages in Wiltshire we cover. Our nearest city page is London, about 75 miles away.
Every address in SN9 is within our area. Nearby, we also work in Fittleton (1 mile south-west), Haxton (1 mile south), Littlecott (1 mile north-west), Netheravon (1 mile south-west) and Figheldean (2 miles south). Further out, we also cover Salisbury (12 miles south), Devizes (11 miles north-west), Amesbury (6 miles south), Marlborough (12 miles north), Bugmore (13 miles south) and Milford (13 miles south).
Landmarks near Coombe
Around Coombe, we work in homes near Church of All Saints.
Also near Coombe
What else we do in Coombe
How the visit works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the next day, the bath is ready to use.
Getting ready for the visit
- Let us know which floor the room is on
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
When we would advise against a repair
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
Send us photos and we will tell you honestly.
What we work on
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Coombe: your questions answered
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your photos and you will get one combined price.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
