Wiltshire · England

Bath Repair for Haxton homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Haxton, with a one-year guarantee on every repair.

  • Repairs from £95
  • A chipped rim or side
  • A failed DIY repair that is discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Haxton

About our bath repair in Haxton

Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Common call-outs are for chips caused by builders and a kit repair that didn’t last, across whirlpool & spa baths, pressed steel enamel and acrylic.

Your repair is guaranteed for a year, as with every job we do.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Location
Haxton (SP4)
County
Wiltshire
Guarantee
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

When we would advise against a repair

A repair is not always the answer, and we will tell you before we start. We can’t fix:

  • A bath that moves underfoot, until its support is fixed
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

If in doubt, send photos and we will say what we think before you book.

Materials we repair

  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths

What we are called out for in Haxton

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.

Most people contact us when they notice something like this:

  • Chips on the rim or sides
  • Scuffs and scratches in the surface
  • Damage done while the bathroom was being fitted
  • Chips under the taps

Questions to ask before you book

  • What prep work is covered
  • How the colour is matched
  • A fixed quote, and whether VAT is included
  • What aftercare is recommended

Our hiring checklist

Prices and what affects them

Repairs from £95. Quotes are free and the price is fixed. What we take into account:

  • How many areas need work
  • Whether it’s a chip, crack, burn or wear
  • The material
  • Doing more than one item at once

Our prices are the same across the UK, so there is no premium for Haxton. What changes the price is the job itself: the material, the amount of damage and how many items.

Quotes from your pictures

Good pictures mean an accurate price. Here’s what helps:

  • Details of any past repairs
  • Natural light rather than flash
  • A picture taken from further back
  • What it’s made of, if you know

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Haxton and nearby

Haxton is about 5 miles north of Amesbury, in Wiltshire. Clients in Haxton get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Our repair technicians cover 425 places across Wiltshire, from the larger towns to small villages. We work right across the region, from Haxton to London (75 miles away).

Here we cover the SP4 postcode area. Streets in the area include Meadow View, Lower Street and Downs View, all of which we cover. Neighbouring places we cover include Netheravon (1 mile south-west), Fittleton (1 mile north-west), Coombe (1 mile north), Figheldean (1 mile south) and Littlecott (1 mile north). Larger places within reach include Salisbury (12 miles south), Devizes (11 miles north-west), Amesbury (5 miles south), Marlborough (12 miles north), Bugmore (12 miles south) and Milford (12 miles south).

Local landmarks in Haxton

Around Haxton, we work in homes near The Dog and Gun pub, Church of All Saints and All Saints CofE Primary School and the streets around them.

Map of Haxton © OpenStreetMap contributors

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

How to look after the repair

Most damage we see is avoidable. A few tips:

  • Rinse it down after each bath
  • Keep metal cans and razors off the surface
  • A dripping tap stains enamel, so fix it early
  • Use a soft cloth and washing-up liquid for everyday cleaning

Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.

Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.

Should you replace it?

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Why us?

  • Everything repaired in place
  • Dust sheets down, tidy finish
  • Accredited with CHAS, Constructionline and SafeContractor
  • Honest advice, even when it means no job

Take a look at our full price list or resurfacing vs replacement cost guide.

What happens on the day

We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a morning or an afternoon, and we leave the room as we found it.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, normally the following day.

Before we arrive

  • Keep children and pets away from the room on the day
  • Let us know about parking or access
  • Let us know if it has been repaired before

Get a quote

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.

Get a fixed price

Advice

Haxton questions

What if the damage is worse than the pictures show?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

What areas do you cover?

Everywhere in the UK, Haxton included. Travel is included in the price.

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

How quickly can you book me in?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.