Wiltshire · England
Bath Repair in Fittleton
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Fittleton and across Wiltshire. Free, fixed quotes from your photos.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Damage beneath the taps
Bath repair in Fittleton, done in place
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. We’re often asked to fix a hole punched through by something heavy and damage beneath the taps, across acrylic, whirlpool & spa baths and cast iron enamel.
All our work comes with a one-year guarantee.
- Where
- Fittleton (SP4, SN9)
- County
- Wiltshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Fittleton
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
If you can see any of these, send us a photo:
- Damage done while the bathroom was being fitted
- Rusty patches near the plughole
- Damage beneath the taps
- Chips along the edge of the bath
Questions to ask before you book
- The length of the guarantee and what it covers
- How the colour is matched
- How your room will be protected
- Whether the price covers travel
What we do, step by step
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we are done and let you know when you can use it again.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the day after, the bath is ready to use.
How to prepare
- Tell us about any previous repairs or coatings
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
Get a quote
To get a price, send a couple of pictures through our quote form or ring us. We will say straight away whether it can be repaired.
Related advice
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Fittleton and the surrounding area
Fittleton is about 5 miles north of Amesbury, in Wiltshire. From the centre of Fittleton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Fittleton is one of 425 places in Wiltshire we cover. Our jobs stretch from Fittleton to London (75 miles away).
All of SP4 and SN9 is within our area, from the main roads to the quietest streets. Streets in the area include Mill Road, Hales Road and Thorne Road. You’ll find Fittleton on the A345, which makes it straightforward to reach. If you’re just outside Fittleton, we cover Haxton (1 mile south-east), Netheravon (1 mile south), Coombe (1 mile north-east), Littlecott (1 mile north) and Figheldean (2 miles south). We also work in nearby towns such as Salisbury (12 miles south), Devizes (11 miles north-west), Amesbury (5 miles south), Marlborough (12 miles north), Bugmore (13 miles south) and Milford (12 miles south).
Around Fittleton
Around Fittleton, we work in homes near Church of All Saints, All Saints CofE Primary School and The Dog and Gun pub and the streets around them.
Repair or replace in Fittleton?
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Colour-matched on site
- Everything repaired in place
- Free fixed quotes from pictures
- One price list for the entire UK
Read our full price list and guide to resurfacing and replacement costs.
FAQs for Fittleton
How long does the repair take to cure?
Typically within a day, though it depends on what we’ve done.
Can you repair a crack in an acrylic bath?
Normally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Prices and what affects them
Repairs from £95. Prices are worked out job by job, from your photos. The main factors are:
- How many areas need work
- Where the damage is and how we get to it
- The type of damage
- How many items we do on one visit
Our prices are the same across the UK, with no extra for Fittleton. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- The material, if you know it
- Good light, ideally daylight, without flash glare
Most customers in Fittleton get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Towns and villages near Fittleton
More services for Fittleton
Looking after it afterwards
So the finish stays in good condition:
- Rinse it down after each bath
- Keep metal cans and razors off the surface
- Use a soft cloth and washing-up liquid for everyday cleaning
- Put a towel in the bath if you are working above it
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- Wear across the entire surface, which needs re-enamelling
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
