Middlesbrough · England

Bath chip & crack repair in Netherfields, Middlesbrough

Bath repair for Netherfields, without a refit. Get a fixed quote from your pictures, then book a visit.

  • Repairs from £95
  • Chips caused by builders
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Netherfields

Bath repair in Netherfields without replacing anything

Most of our bath repairs take a few hours, and you can normally bathe again the next day. There’s no need to book a plumber or tiler, because nothing is disconnected. Common call-outs are for damage beneath the taps and a kit repair that didn’t last, on pressed steel enamel, cast iron enamel and acrylic.

Big or small, you get the same one-year guarantee in Netherfields and across Middlesbrough.

Area
Netherfields (TS3, TS7, TS6)
Area hub
Middlesbrough
Guarantee
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

For landlords and businesses

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

How to look after the repair

Much of the damage we repair could have been avoided. These habits help:

  • If an acrylic bath flexes, have its feet adjusted
  • Protect the bath with a towel when doing jobs nearby
  • Store metal items away from the bath
  • Fix dripping taps early to stop staining and limescale

There is nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

How the visit works

We work cleanly and quietly. Protection goes down first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.

  1. First, we check the damage against your pictures and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Getting ready for the visit

  • Have a window or extractor fan available
  • Mention any parking restrictions or tricky access
  • Let us know which floor the room is on

Getting a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Send photos for a quote

Read more

Why repair rather than replace?

Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.

Why choose Surface Doctor in Netherfields

  • Free fixed quotes from pictures
  • Colour-matched on site
  • One-year guarantee on every repair
  • Rooms protected and left tidy

See our prices page and guide to resurfacing and replacement costs.

How we price bath repair

Repairs from £95. We charge the same across the UK, including Netherfields. The price reflects:

  • How much damage there is
  • Unusual colours or finishes
  • Doing more than one item at once
  • The material

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed price

We price nearly every job from pictures. This is what we need:

  • A picture taken from further back
  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale
  • One sharp close-up of the damage

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

What a repair cannot fix

A repair isn’t always the answer, and we’d rather say so up front. We can’t fix:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • A steel bath rusted through

If in doubt, send photos and we’ll say what we think.

Materials we work on in Netherfields

  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel

Netherfields questions

Do you charge for travel?

We do not add a call-out fee. The fixed quote covers the visit and the work.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Is a cracked acrylic bath repairable?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you repair a chip on a coloured bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Something went through my bath. Can it be fixed?

In most cases. Send us a picture of the hole and one from under the bath if you can.

Where we work around Netherfields

Netherfields is about 1 mile west of Eston, in Middlesbrough. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover all 33 towns and villages across Middlesbrough, from the larger towns to small villages. We work right across the region, from Netherfields to Newcastle upon Tyne (about 35 miles away).

Jobs in TS3, TS7 and TS6 are booked in the same way as anywhere else. Local streets include Tebay Road, Scott Road and High Street, all of which we cover. Netherfields is on the A171, so it’s easy for us to reach. We also cover the places around Netherfields: Ormesby (1 mile south), Park End (1 mile west), Thorntree (1 mile north), Normanby (1 mile east) and Eston (1 mile east). Further out, we also cover Brookfield (3 miles south-west), Newtown (6 miles west), Oxbridge (6 miles west), Ayresome (3 miles west), Tilery (5 miles west) and Acklam (4 miles west).

Around Netherfields

Our clients here include homes close to Church of St Cuthbert, Pennyman Primary Academy and Stewart Park. Netherfields’s nearest station is Marton station, about 1.1 miles south-west of the centre. Further afield, we also cover the area around St Luke's Hospital (1.4 miles west) and Newham Grange Farm Museum (2.4 miles south-west). Green spaces nearby include Eston Nab and RSPB Salthome.

  • Other local spots include Cleveland (2.1 miles south)
Map of Netherfields © OpenStreetMap contributors

Different materials, different repairs

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.