North Somerset · England
Bath chip & crack repair in Norton, North Somerset
Damaged bath in Norton? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Rust by the waste and overflow
Should you replace it?
Swapping a damaged bath for a new one usually means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- A year’s guarantee on all work
- We leave the room as we found it
- Most jobs done in one visit
- A fixed quote before booking
See our pricing and guide to resurfacing and replacement costs.
Bath repair in Norton, done in place
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. If you’re dealing with cracks in an acrylic bath and a chip where the taps sit, we can typically put it right, on cast iron enamel, whirlpool & spa baths and pressed steel enamel alike.
We stand behind the work with a one-year guarantee.
- Where
- Norton (BS22)
- County
- North Somerset
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to two to three hours for most chips, tidy-up included.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Related advice
Landlord and trade work in Norton
We’re used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- If an acrylic bath flexes, have its feet adjusted
- Get any new chip repaired before it rusts
- Fix dripping taps early to stop staining and limescale
- Put a towel in the bath if you are working above it
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
What we can’t put right
We’ll always be straight with you, so here’s what a repair will not do:
- Flexing caused by a failed cradle or loose feet
- A steel bath rusted through
- Cracks in acrylic we can’t reach from underneath
Not sure? Send photos and we will give you a straight answer.
What we work on
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we take into account:
- The material and finish
- Doing more than one item at once
- Where the damage is and how we get to it
- How hard the colour is to match
Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your pictures
Before you send pictures, a few simple things make all the difference:
- The material, if you know it
- Where you are, by postcode
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
If you’re in Norton and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Towns and villages near Norton
Also in Norton
Norton and nearby
Norton is about 1 mile north of Weston-super-Mare, in North Somerset. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover all 86 towns and villages in North Somerset, from the larger towns to small villages.
Here we cover the BS22 postcode area. You will find streets such as Lower Norton Lane and Norton Lane, all of which we cover. Other places close to Norton include Kewstoke (1 mile west), Milton (1 mile south), Worle (1 mile south-east), Weston-super-Mare (1 mile south) and Wick St Lawrence (2 miles north-east). Larger places within reach include Portishead (11 miles north-east), Clevedon (6 miles north-east), Nailsea (9 miles north-east), Yatton (5 miles east), Locking (3 miles south-east) and Oldmixon (3 miles south).
Around Norton
Typical jobs here are in homes near Jill's Garden, Worle Community School and The Old Manor pub and the streets around them. Nearby too are Worle Community School (1.2 miles south-east), Church of St Paul (0.6 miles south-west) and Kewstoke Primary School (within half a mile south-west). For rail, the closest station is Weston Milton station, about 1.4 miles south of the centre. A little further out are Lambretta Scooter Museum (1.8 miles south-west) and Castle Batch (1.1 miles east). Not far away are Worlebury Hill and Blake's Pools.
Norton: your questions answered
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
What areas do you cover?
The entire UK, including all of North Somerset. Send your postcode with your pictures and we’ll confirm dates.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.
About our accreditations · Every repair comes with a one-year guarantee.
