Wiltshire · England
Bath Repair for Oaksey homes
Local bath repair for Oaksey: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- A chipped rim or side
Aftercare tips
After the repair has cured, a few habits help it last:
- Store metal items away from the bath
- Do not leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
- Clean with warm water and a mild detergent
There’s nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Bath repair at your home in Oaksey
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Typical jobs include a failed DIY repair that’s discoloured or lifting and a chipped rim or side, in roll-top & freestanding, cast iron enamel and pressed steel enamel.
All of our repairs are guaranteed for twelve months in Oaksey and everywhere else. If something goes wrong with the work, we come back.
- Location
- Oaksey (SN16)
- Area hub
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
A repair isn’t always the answer, and we would rather say so up front. We can’t fix:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- Cracks in acrylic we cannot reach from underneath
Send us photos and we’ll tell you honestly before you book.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Do you need bath repair in Oaksey?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
It’s worth getting a quote if you see:
- Chips caused by builders
- Cracks in an acrylic bath
- Impact holes in acrylic
- Rusty patches near the plughole
What to look for in a quote
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- How soon you can use it again
- How the room is protected while they work
Nearby places to Oaksey
Other services in Oaksey
Common questions in Oaksey
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we’ll plan for it.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
What affects the price in Oaksey
Repairs from £95. Every quote is fixed and free. What we look at:
- How many items we do on one visit
- The size and number of damaged areas
- What the surface is made of
- How easy the damage is to reach
We charge the same wherever you are, with no extra for Oaksey. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
You can generally get a fixed price without us visiting. To make it quick:
- The material, if you know it
- Details of any past repairs
- Where you are, by postcode
- One sharp close-up of the damage
To get a price, send a couple of pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How it works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
How to get a price
Most customers in Oaksey get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
Landlords, agents and businesses in Oaksey
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Our work in Oaksey
Oaksey is about 5 miles south-west of Cirencester, in Wiltshire. Wherever you are in the SN16 postcode area, a technician comes to you. We work in all 425 towns and villages across Wiltshire, from the larger towns to small villages. We work right across the region, from Oaksey to Birmingham (58 miles away).
Postcode districts we cover here: SN16. From Minety Lane, Wheatsheaf Lane and Bendy Bow or a nearby road, we can come to you. Neighbouring places we cover include Chelworth (1 mile west), Hankerton (2 miles south-west), Kemble (2 miles north), Crudwell (3 miles west) and Perry Green (3 miles south-west). Within a short drive, we also cover Chippenham (14 miles south), Calne (14 miles south), Malmesbury (5 miles south-west), Hardenhuish (13 miles south-west), Lyneham (9 miles south) and Pewsham (14 miles south).
Local landmarks in Oaksey
Typical jobs here are in homes near Oaksey CofE Primary School and Church of All Saints. The nearest railway station is Kemble station, about 2.5 miles north of the centre. Other landmarks nearby include Smerrill Farm Museum (3.4 miles north) and Cirencester Hospital (5.2 miles north). Open spaces near Oaksey include Clattinger Farm.
About our accreditations · Every repair comes with a one-year guarantee.
