Perth and Kinross · Scotland
Bath Repair in Old Blair
Damaged bath in Old Blair? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Impact holes in acrylic
- Scuffs and scratches in the surface
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Avoid scourers, wire wool and gritty cream cleaners
- Don’t leave razors or cans standing in the bath
- Stick to mild cleaners and a soft cloth
- Put a towel in the bath if you are working above it
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Bath repair in Old Blair, done in place
Most of our bath repairs take a few hours, and the bath is back in use the following day. You won’t need a plumber or tiler, because nothing is disconnected. Whether it’s impact holes in acrylic and rust by the waste and overflow, we can help.
All our work is covered by our one-year guarantee.
- Location
- Old Blair (PH18)
- Area hub
- Perth and Kinross
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Our bath repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- No extra charge for your area
- Colour-matched on site
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing or guide to resurfacing and replacement costs.
Do you need bath repair in Old Blair?
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Keep an eye out for any of the following:
- A chipped rim or side
- Holes from dropped items
- Chips under the taps
- Hairline or through cracks in acrylic
What your quote should include
- Who turns up on the day
- How long it needs to cure
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
FAQs for Old Blair
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can a cracked acrylic bath be fixed?
Usually, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
How the visit works
Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Open a window if you can
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
About Old Blair
Old Blair is about 23 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Clients in Old Blair get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Old Blair is one of 107 places in Perth and Kinross where we work. You can also see our page for Edinburgh, about 62 miles away.
Our technicians cover all of PH18 and the streets around it. Other places close to Old Blair include Bridge of Tilt (1 mile east), Blair Atholl (1 mile east), Old Struan (4 miles west), Moulin (6 miles south-east) and Pitlochry (7 miles south-east). For island and remote addresses, ring us first and we’ll plan the trip.
Local landmarks in Old Blair
Around Old Blair, we work in homes near Old Blair and the streets around them. The nearest railway station is Blair Atholl station, about 0.5 miles south-east of the centre. Further afield, we also cover the area around Atholl Country Life Museum (0.5 miles south-east) and Blair Castle (less than half a mile north). The countryside around Old Blair includes Loch Moraig and Creag Odhar.
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Towns and villages near Old Blair
Also in Old Blair
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
