Flintshire · England
Bath chip & crack repair in Old Warren, Flintshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Old Warren, carried out at your home and guaranteed for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips under the taps
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Bath repair at your home in Old Warren
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. Whether it’s holes from dropped items and a chipped rim or side, we can typically put it right.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Old Warren (CH4)
- Area hub
- Flintshire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Metal that has corroded all the way through
- Cracks in acrylic we can’t reach from underneath
- Water coming from the waste or taps rather than the bath
Send us photos and we will tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
FAQs for Old Warren
Is a holed acrylic bath repairable?
Generally. Photos of the hole and the underside help us check.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Do you come to Old Warren?
Yes. We cover the whole UK and travel to Old Warren. Send us pictures for a fixed quote, or call 0345 017 0787.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How do I get a price for bath repair in Old Warren?
Repairs from £95. We give a fixed quote from your pictures. Send a close-up and a photo of the whole item and your postcode.
Places near Old Warren
More services for Old Warren
Old Warren and nearby
Old Warren is about 3 miles east of Bwcle, in Flintshire. Jobs in Old Warren are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Our repair technicians cover 139 places in Flintshire. We work right across the region, from Old Warren to Liverpool (17 miles away).
All of CH4 is covered, from the main roads to the quietest streets. We also travel to Dobs Hill (1 mile west), Penymynydd (1 mile south-west), Higher Kinnerton (1 mile south-east), Little Mountain (2 miles west) and Penyffordd (2 miles south-west). We also work in nearby towns such as Connah's Quay (4 miles north-west), Buckley (3 miles west), Bwcle (3 miles west), Flint (7 miles north-west), Saltney (4 miles east) and Mold (5 miles west).
Near you in Old Warren
Typical jobs here are in homes near St Johns the Baptist V.A. Primary School, Hawarden High School and Gladstone's Library and the streets around them. The closest station to Old Warren is Hawarden station, roughly 1.6 miles north-west. Nearby you will also find Connahs Hey Mound (1.2 miles north) and Broughton Shopping Park (1.8 miles east). For a walk, there is Padeswood Pool and Pen Pontblyddyn.
- Other local spots include West Saltney (2.4 miles north)
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Keeping it looking good
Nothing complicated is needed:
- Clean with warm water and a mild detergent
- Do not leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
- If an acrylic bath flexes, have its feet adjusted
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Free fixed quotes from pictures
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- Colour mixed on the day to match
Read our full price list and guide to resurfacing and replacement costs.
How the visit works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the next day.
Preparing for the visit
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
Get a quote
For a price in Old Warren, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Landlords, agents and businesses in Old Warren
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
How we price bath repair
Prices start from £95. There is no area surcharge for Old Warren. What changes the price is:
- Access to the area
- The colour and finish to match
- Whether we combine several jobs
- The material
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Whether it’s been repaired or coated before
- The material, if you know it
- A wider photo showing the whole bath
- One sharp close-up of the damage
To get a price, send a couple of pictures through our quote form or call us. We will say immediately whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
