Gloucestershire · England
Bath Repair for Overbury homes
Bath repair for Overbury, without a refit. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- Snagging damage from a refit
- A kit repair that didn’t last
Covering Overbury
Overbury is about 5 miles north-east of Tewkesbury, in Gloucestershire. Jobs in Overbury are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Overbury is one of 470 places in Gloucestershire where we work. Our nearest city page is Birmingham, about 31 miles away.
Every address in GL20 is within our area, from the main roads to the quietest streets. We also travel to Conderton (1 mile south), Kemerton (1 mile west), Westmancote (1 mile west), Lower Westmancote (2 miles west) and Beckford (2 miles south-east). Within a short drive, we also cover Cheltenham (10 miles south), Gloucester (15 miles south-west), Tewkesbury (5 miles south-west), St Paul's (10 miles south), Lansdown (10 miles south) and Bishop's Cleeve (6 miles south).
Local landmarks in Overbury
Around Overbury, we work in homes near Bredon Hill Middle School, Overbury CofE First School and Church of St Faith and the streets around them. The closest station to Overbury is Ashchurch for Tewkesbury station, about 3.6 miles south-west of the centre. Further afield, we also cover the area around Elmley Castle (1.8 miles north-east). For a walk, there’s Kemerton Lake and Bredon Hill.
Bath repair at your home in Overbury
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Whether it’s rust spots around the plughole and a hole punched through by something heavy, we can usually put it right.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Where
- Overbury (GL20)
- Area hub
- Gloucestershire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
More services for Overbury
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Keep metal cans and razors off the surface
- Get any new chip repaired before it rusts
- Check that an acrylic bath doesn’t move when you stand in it
- Rinse the bath after use, especially in hard water areas
There is nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Questions from Overbury
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you charge for travel?
There is no separate call-out charge. Your fixed quote includes everything.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Do you work in Overbury?
We do. We send a technician to Overbury for every job, with no extra charge for travel.
Common problems we fix in Overbury
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Send us a photo if you notice any of these:
- Damage done while the bathroom was being fitted
- A failed DIY repair that is discoloured or lifting
- Deep scratches in acrylic
- Chips under the taps
Questions to ask before you book
- Whether a trained technician does the job
- If travel is included in the price
- What preparation is included
- What the guarantee covers, and for how long
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
When a repair is not the answer
A repair is not right for every job, for example:
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
How the visit works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours, depending on the damage. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
- Ensure the room can be ventilated
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Work for landlords and builders
We work for landlords, letting agents and housing providers in Overbury as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Should you replace it?
Replacing a fitted bath generally means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- One price list for the entire UK
- Colour mixed on the day to match
- We come to you, anywhere in the UK
- No need to remove anything
See our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
