Renfrewshire · Scotland
Bath Repair for Paisley homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Paisley and across Renfrewshire. Send photos for a free, fixed quote.
- Repairs from £95
- Deep scratches in acrylic
- A hole punched through by something heavy
Bath repair in Paisley, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We are frequently asked to fix chips caused by builders and a cracked acrylic bath, on acrylic, cast iron enamel and whirlpool & spa baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Paisley (PA2, PA1, PA3, PA4)
- Area hub
- Renfrewshire
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Paisley
A cracked acrylic bath usually wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
Most people get in touch when they notice something like this:
- Rust spots around the plughole
- Holes from dropped items
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
Comparing quotes
- Whether the price is fixed and includes VAT
- What prep work is covered
- How the colour is matched
- What happens if the damage is worse than the photos show
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Use a soft cloth and washing-up liquid for everyday cleaning
- If an acrylic bath flexes, have its feet adjusted
- Don’t leave razors or cans standing in the bath
- Get any new chip repaired before it rusts
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
The process
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We clean up when we are done and let you know when you can use it again.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let us know which floor the room is on
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
Covering Paisley
Paisley is about 6 miles west of Glasgow, in Renfrewshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Paisley is one of 21 places in Renfrewshire where we work. You can also see our page for Glasgow, about 6 miles away.
Our technicians cover all of the PA2, PA1, PA3 and PA4 postcode area and the streets around it. Jobs here include addresses on High Street, Orr Square and Station Road. Being close to the A726 and A741, Paisley is simple for us to get to. Other places close to Paisley include Charleston (1 mile south-east), Glenburn (1 mile south), Ferguslie Park (1 mile north-west), Inkerman (2 miles north-west) and Elderslie (2 miles west). We also work in nearby towns such as Renfrew (3 miles north-east), Johnstone (3 miles west), Bishopton (6 miles north-west), Linwood (3 miles west), Bridge of Weir (6 miles west) and Craigends (4 miles north-west).
Around Paisley
Our customers here include homes close to Castlehead High School, St Luke's Church and Gallows Green, among other places. There is a railway station in Paisley itself: Paisley Canal station. A little further out are Riccartsbar Hospital (under half a mile west) and Paisley Museum (0.6 miles north). The countryside around Paisley includes Walls Loch and Neilston Pad.
Nearby places to Paisley
Other services in Paisley
Should you replace it?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- We will tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
- Free fixed quotes from pictures
- Repair technicians who travel to you, UK-wide
Take a look at our full price list or bath cost comparison.
Paisley: your questions answered
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Can you repair a hole in a bath?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Do you cover the entire of Renfrewshire?
We cover the entire UK, including Paisley and the rest of Renfrewshire. Just include your postcode and we will confirm dates.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How long before I can use the bath?
Usually the day after. We confirm the time before we leave.
About our accreditations · Every repair comes with a one-year guarantee.
