Pembrokeshire · Wales
Bath chip & crack repair in Pelcomb Bridge, Pembrokeshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Pelcomb Bridge and across Pembrokeshire. Free, fixed quotes from your photos.
- Repairs from £95
- Scratches you can feel with a fingernail
- Impact holes in acrylic
Bath repair at your home in Pelcomb Bridge
A typical bath repair is a few hours’ work, and you can usually bathe again the next day. There is no need to book a plumber or tiler, because nothing is disconnected. If you’re dealing with a chip where the taps sit and hairline or through cracks in acrylic, we can help, on acrylic, cast iron enamel and pressed steel enamel alike.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Area
- Pelcomb Bridge (SA62)
- Area hub
- Pembrokeshire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Your questions about bath repair in Pelcomb Bridge
Something went through my bath. Can it be fixed?
Generally. Send us a picture of the hole and one from under the bath if you can.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
I tried a repair kit. Can you fix it?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Pelcomb Bridge and the surrounding area
Pelcomb Bridge is about 2 miles north-west of Haverfordwest, in Pembrokeshire. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Pelcomb Bridge is one of 223 places in Pembrokeshire we cover.
All of SA62 is covered. If you’re just outside Pelcomb Bridge, we cover Pelcomb Cross (1 mile north-west), Lambston (2 miles west), Camrose (2 miles north), Keeston (2 miles north-west) and Wolfsdale (3 miles north). Within a short drive, we also cover Milford Haven (7 miles south), Pembroke (10 miles south), Pembroke Dock (9 miles south), Fishguard (12 miles north), Green (10 miles south) and Goodwick (13 miles north).
Local landmarks in Pelcomb Bridge
Our customers here include homes close to Haverfordwest High VC School and The Rising Sun Inn, among other places. For rail, the closest station is Haverfordwest station, about 1.9 miles south-east of the centre. Other landmarks nearby include Withybush General Hospital (1.6 miles east) and Prendergast Castle (1.6 miles east). Green spaces nearby include Rogeston Mount.
Signs you need bath repair in Pelcomb Bridge
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The things clients normally mention when they call include:
- Cracks in an acrylic bath
- Scuffs and scratches in the surface
- Chips under the taps
- A chipped rim or side
What to look for in a quote
- How long the guarantee is and what it covers
- How the room is protected while they work
- Whether there are any call-out or travel charges
- Who will actually do the work
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Nearby places to Pelcomb Bridge
Also in Pelcomb Bridge
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Prices and what affects them
Repairs from £95. There’s no charge for travel to Pelcomb Bridge. The price depends on:
- Whether old repairs or coatings need taking off
- Access to the area
- The material
- The size and number of damaged areas
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
You can take the pictures on your phone. Ensure they show:
- A wider photo showing the entire bath
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
To get a price, send a couple of photos using our quote form or call us. We will say right away whether it can be repaired.
Why repair rather than replace?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Fixed prices from your photos
- Most jobs done in one visit
- Colour-matched on site
- Rooms protected and left tidy
Read our pricing and resurfacing vs replacement cost guide.
What we do, step by step
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
- Make sure the area is dry
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
