Pembrokeshire · Wales
Bath Re-enamelling for Pelcomb Cross homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Pelcomb Cross. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
FAQs for Pelcomb Cross
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
How much does bath re-enamelling cost in Pelcomb Cross?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Are there extra charges for Pelcomb Cross?
Travel is included in the price, and we charge the same wherever you are.
Bath re-enamelling in Pelcomb Cross without replacing anything
Most baths are re-enamelled in a day, and you can use the bath the following day. Nothing is disconnected or removed. If you’re dealing with worn patches where water runs and sits and an old resurfacing that’s failing, we can help.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Pelcomb Cross (SA62)
- Area hub
- Pembrokeshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Keep suction mats out of the bath
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Prices and what affects them
Prices start from £350. We price every job individually. The main factors are:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- How many areas need work
- Whether it’s a chip, crack, burn or wear
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Details of any past repairs
- Natural light rather than flash
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
When we would advise against a repair
In fairness, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Pelcomb Cross
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we will talk to you before going ahead.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Advice
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Landlords, letting agents and housing providers in Pelcomb Cross use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Common problems we fix in Pelcomb Cross
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
It’s worth getting a quote if you see:
- Several chips and rust patches
- An old resurfacing that’s failing
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
What your quote should include
- What preparation is included
- Whether the price covers travel
- How long the guarantee is and what it covers
- How to look after the finish
Pelcomb Cross and the surrounding area
Pelcomb Cross is about 2 miles north-west of Haverfordwest, in Pembrokeshire. Jobs in Pelcomb Cross are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We cover all 223 towns and villages in Pembrokeshire.
Every address in SA62 is covered, from the main roads to the quietest streets. Jobs here include addresses on Pelcomb Villas and Pelcomb Drive and the roads around them. Close by, we cover Pelcomb Bridge (1 mile south-east), Lambston (1 mile south-west), Keeston (1 mile north-west), Camrose (2 miles north) and Simpson Cross (2 miles north-west). Larger places within reach include Milford Haven (7 miles south), Pembroke (11 miles south-east), Pembroke Dock (10 miles south), The Marsh (3 miles south-east), Fishguard (12 miles north) and Green (11 miles south-east).
Near you in Pelcomb Cross
Typical jobs here are in homes near Pelcomb Inn, Church of St Ishmael and Haverfordwest High VC School, among other places. The nearest railway station is Haverfordwest station, roughly 2.9 miles south-east. Nearby you will also find Withybush General Hospital (2.4 miles east) and Former County Gaol (2.5 miles south-east). Not far away are Rogeston Mount.
Also near Pelcomb Cross
Other services in Pelcomb Cross
About our accreditations · Every repair comes with a one-year guarantee.
