Swansea · Wales
Bath Repair for Port-Eynon homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Port-Eynon and across Swansea. Free, fixed quotes from your photos.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips under the taps
Bath repair in Port-Eynon without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in a single visit. Typical jobs include rusty patches near the plughole and a chip where the taps sit, on roll-top & freestanding, cast iron enamel and pressed steel enamel.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Port-Eynon (SA3)
- Region
- Swansea
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Ensure the area is dry
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
Landlords, agents and businesses in Port-Eynon
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
For anyone letting property in or around Port-Eynon, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Repairing versus replacing in Port-Eynon
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
- Usually one visit, start to finish
- No need to remove anything
Take a look at our prices page and bath cost comparison.
Prices and what affects them
Prices start from £95. Prices are worked out job by job, from your photos. What matters most is:
- How hard the colour is to match
- Any earlier repairs that need removing first
- Access to the area
- The type of damage
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Quotes from your pictures
You can typically get a fixed price without us visiting. To make it quick:
- A close-up of the damage, in focus
- Something in shot to show the size
- Any details about the material
- A picture taken from further back
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Honest limits
Some jobs aren’t right for a repair, including:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Port-Eynon: your questions answered
What happens after I send pictures?
We come back with a fixed price, plus dates. There is no obligation to book.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Is a holed acrylic bath repairable?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Common problems we fix in Port-Eynon
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
It’s worth getting a quote if you see:
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
Comparing quotes
- How the colour is matched
- A fixed price, and whether VAT is included
- How soon you can use it again
- What aftercare is recommended
Aftercare tips
After the repair has cured, a few habits help it last:
- Give the bath a quick rinse after use
- Get a dripping tap fixed promptly
- Keep metal cans and razors off the surface
- Check that an acrylic bath does not move when you stand in it
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Covering Port-Eynon
Port-Eynon is about 10 miles south of Llanelli, in Swansea. From the centre of Port-Eynon to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 153 places in Swansea.
Every address in SA3 is within our area, from the main roads to the quietest streets. If you are just outside Port-Eynon, we cover Scurlage (1 mile north), Middleton (3 miles north-west), Reynoldston (3 miles north), Rhossili (3 miles north-west) and Llangennith (4 miles north-west). We also work in nearby towns such as Swansea (13 miles north-east), Castle (13 miles north-east), Morriston (15 miles north-east), Mount Pleasant (13 miles north-east), Gorseinon (11 miles north-east) and Dyfaty (13 miles north-east).
What’s near Port-Eynon
Around Port-Eynon, we work in homes near The Ship Inn and the streets around them. A little further out are Gower Farm Museum & Tourist Centre (2.3 miles north) and Port Eynon Castle (under half a mile south-east). Open spaces near Port-Eynon include Serpentine Lake and Hangman's Cross Hill.
Nearby places to Port-Eynon
What else we do in Port-Eynon
About our accreditations · Every repair comes with a one-year guarantee.
