Suffolk · England
Bath chip & crack repair in Potash, Suffolk
Our technicians come to Potash for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips caused by builders
- Chips on the rim or sides
How we handle bath repair in Potash
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Whether it’s scratches you can feel with a fingernail and cracks in an acrylic bath, we can usually put it right, whatever the material.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Potash (IP9)
- County
- Suffolk
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in Potash
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
If you can see any of these, send us a photo:
- A failed DIY repair that is discoloured or lifting
- A chipped rim or side
- Scuffs and scratches in the surface
- Rust by the waste and overflow
Comparing quotes
- The length of the guarantee and what it covers
- How the room is protected while they work
- Whether there are any call-out or travel charges
- How soon you can use it again
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Keeping it looking good
To keep it looking its best for years:
- Ensure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Have new chips seen to early
- Get a dripping tap fixed promptly
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for a morning or an afternoon from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
Get a quote
Most clients in Potash get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Also in Potash
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Repairing versus replacing in Potash
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why us?
- One price list for the whole UK
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
- Generally one visit, start to finish
Take a look at our pricing and resurfacing vs replacement cost guide.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Common questions in Potash
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How long does the repair take to cure?
Typically within a day, depending on the repair.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a cracked acrylic bath repairable?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Where we work around Potash
Potash is about 5 miles south-west of Ipswich, in Suffolk. Jobs in Potash are booked in like any other job: a fixed quote from photos, then a visit to do the work. Potash is one of 731 places in Suffolk we cover. We work right across the region, from Potash to London (61 miles away).
Our visits in IP9 are booked in the same way as anywhere else. Whether you live on Church Road and Potash Lane or anywhere nearby, a technician can come to you. We also cover the places around Potash: Bentley (1 mile south-west), The Heath (1 mile south-east), East End (2 miles south-west), Brantham (2 miles south) and Cattawade (3 miles south). We also work in nearby towns such as Ipswich (5 miles north-east), Felixstowe (11 miles east), Sudbury (15 miles west), Stowmarket (14 miles north), Kesgrave (8 miles north-east) and Woodbridge (12 miles north-east).
Landmarks near Potash
In Potash, that means homes near Church of St Mary and Case is Altered pub. The closest station to Potash is Manningtree station, about 3.6 miles south-west. Further afield, we also cover the area around East Suffolk and Ipswich Hospital (5.5 miles north-east) and Little Wenham Castle (2.3 miles north-west). The countryside around Potash includes Cattawade Marshes and Alton Water.
About our accreditations · Every repair comes with a one-year guarantee.
