South Lanarkshire · Scotland
Bath chip & crack repair in Ravenstruther, South Lanarkshire
Bath repair in Ravenstruther without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Scuffs and scratches in the surface
- Chips on the rim or sides
How we price bath repair
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- Access to the area
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- How many items we do on one visit
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Getting a price from pictures
Good photos mean an accurate price. Here’s what we find most useful:
- The material, if you know it
- Where you are, by postcode
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say straight away if a repair is the right fix.
Bath repair in Ravenstruther without replacing anything
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in a single visit. We regularly repair acrylic, whirlpool & spa baths and pressed steel enamel, and common reasons people get in touch are chips along the edge of the bath and holes from dropped items.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Ravenstruther (ML11)
- Region
- South Lanarkshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
About Ravenstruther
Ravenstruther is about 6 miles south-east of Carluke, in South Lanarkshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 139 places in South Lanarkshire, from the larger towns to small villages. You can also see our page for Glasgow, about 25 miles away.
Our repair technicians cover all of ML11. From Lanark Road, Silvermuir Road and Ayr Road or anywhere nearby, a technician can come to you. If you are just outside Ravenstruther, we cover Cleghorn (1 mile west), Carstairs (1 mile north-east), Carstairs Junction (2 miles east), Lanark (2 miles west) and Pettinain (2 miles south-east). Further out, we also cover Hamilton (15 miles north-west), Larkhall (10 miles west), Carluke (6 miles north-west), Strathaven (14 miles west), Burnbank (15 miles north-west) and Neilsland (15 miles north-west).
Near you in Ravenstruther
Typical jobs here are in homes near Lanark Grammar School. Ravenstruther’s nearest station is Carstairs station, about 2 miles east. A little further out are William Smellie Memorial Hospital (2.9 miles west) and Royal Burgh of Lanark Museum (2.6 miles west). Open spaces near Ravenstruther include Lanark Loch.
When a repair isn’t the answer
A repair is not right for every job, including:
- A steel bath rusted through
- Wear across the whole surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Repair or replace in Ravenstruther?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Ravenstruther
- Fixed prices from your pictures
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
Read our prices page or guide to resurfacing and replacement costs.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which generally takes a few hours. If anything looks different from your photos, we will talk to you before going ahead.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the next day, the bath is ready to use.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
- Clear the area around the damage
How to get a price
Send us pictures of the damage and one of the whole item, with your ML11 postcode, and we’ll reply with a fixed price.
Advice
Common problems we fix in Ravenstruther
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Signs it’s time to call us include:
- Scuffs and scratches in the surface
- Impact holes in acrylic
- Cracks in an acrylic bath
- Rust by the waste and overflow
What to look for in a quote
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
- How to look after the finish
- What the guarantee covers, and for how long
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Questions from Ravenstruther
What information do you need?
Use the quote form or ring 0345 017 0787.
Do the materials smell?
Expect a mild smell while we are working, which fades afterwards.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
More services for Ravenstruther
Aftercare tips
Simple care helps the repair last. We recommend:
- Do not leave a fresh chip for long
- Fix dripping taps early to stop staining and limescale
- Stick to mild cleaners and a soft cloth
- Make sure an acrylic bath is firm underfoot
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
