Wrexham · Wales
Bath Repair in Redwither
Fixed-price bath repair in Redwither and the surrounding area, typically in one visit and guaranteed for a year.
- Repairs from £95
- Chips under the taps
- Rusty patches near the plughole
How we handle bath repair in Redwither
Most of our bath repairs take a few hours, and the bath is back in use the following day. You won’t need a plumber or tiler, because nothing is disconnected. If you are dealing with a cracked acrylic bath and scuffs and scratches in the surface, we can generally put it right, on whirlpool & spa baths, cast iron enamel and pressed steel enamel alike.
Whatever the size of the job, you get the same one-year guarantee in Redwither and across Wrexham.
- Where
- Redwither (LL13)
- County
- Wrexham
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a morning or an afternoon from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
- Tell us about any previous repairs or coatings
Getting a price
Most customers in Redwither get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Also near Redwither
More services for Redwither
Looking after it afterwards
So the finish stays in good condition for years:
- Avoid scourers, wire wool and gritty cream cleaners
- Don’t leave a fresh chip for long
- Rinse it down after each bath
- If an acrylic bath flexes, have its feet adjusted
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
Landlord and trade work in Redwither
Housing associations and facilities teams use us for planned and reactive repairs in Wrexham and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Prices and what affects them
Repairs from £95. Prices are worked out job by job. What matters most is:
- The type of damage
- The size and number of damaged areas
- The colour and finish to match
- Doing more than one item at once
Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- Details of any past repairs
- A clear, close picture of the problem area
- Natural light rather than flash
- Where you are, by postcode
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Signs you need bath repair in Redwither
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
The most common problems we are called about are:
- Scuffs and scratches in the surface
- Rusty patches near the plughole
- Damage beneath the taps
- Snagging damage from a refit
Before you book anyone
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
- What happens if they find more damage
- How the colour is matched
Your questions about bath repair in Redwither
Something went through my bath. Can it be fixed?
Generally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How long before I can use the bath?
Typically the day after. We will tell you the exact curing time when we finish.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Honest limits
We will always be straight with you, so here’s what a repair cannot fix:
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
- Wear across the entire surface, which needs re-enamelling
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
About Redwither
Redwither is about 2 miles east of Caia Park, in Wrexham. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Redwither is one of 115 places in Wrexham where we work. Our nearest city page is Liverpool, about 25 miles away.
All of LL13 is within our area. From Abbey Road, Dutton Road and First Avenue or anywhere nearby, a technician can come to you. We also cover the places around Redwither: Pentre Maelor (1 mile south-west), Sesswick (1 mile south), Ridleywood (1 mile north-east), Cross Lanes (1 mile south) and Llan-y-pwll (2 miles north). We also work in nearby towns such as Wrexham (3 miles west), Offa (3 miles west), Rhosllannerchrugog (6 miles west), Rhosddu (3 miles west), Acton (3 miles north-west) and Little Acton (3 miles north-west).
Landmarks near Redwither
Around Redwither, we work in homes near Rhosnesni High School, St Pauls Voluntary Aided Primary School and The Red Wither Inn, among other places. The closest station to Redwither is Wrexham Central station, roughly 3.2 miles west. Well-known places in the area include Wrexham Maelor Hospital (3.6 miles west) and Football Museum of Wales and Wrexham Museum (3.2 miles west). The countryside around Redwither includes Wilderness Tip (Gresford) and Pant-yr-ochain Big Pool.
About our accreditations · Every repair comes with a one-year guarantee.
