Cumbria · England
Bath Repair for Roosebeck homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Roosebeck, with a one-year guarantee on every repair.
- Repairs from £95
- Scuffs and scratches in the surface
- Rust by the waste and overflow
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Cumbria and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
How we handle bath repair in Roosebeck
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. We regularly repair cast iron enamel, acrylic and pressed steel enamel, and common reasons people get in touch are snagging damage from a refit and cracks in an acrylic bath.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Area
- Roosebeck (LA12, LA13)
- Area hub
- Cumbria
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What else we do in Roosebeck
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Don’t leave a fresh chip for long
- Check that an acrylic bath does not move when you stand in it
- Keep abrasive pads and gritty cleaners away from the bath
- Give the bath a quick rinse after use
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
What we do, step by step
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours. Before leaving, we tell you when it can be used and how to look after it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
Get a quote
To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Related advice
Prices and what affects them
Repairs from £95. We price every job individually, from your pictures. What matters most is:
- How easy the damage is to reach
- Whether we combine several jobs
- How many areas need work
- The type of damage
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
Photographing the damage takes a minute. Try to send:
- The material, if you know it
- A close-up of the damage, in focus
- Something in shot to show the size
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Signs you need bath repair in Roosebeck
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move.
The most common problems we are called about are:
- A kit repair that didn’t last
- A chipped rim or side
- Scuffs and scratches in the surface
- Rusty patches near the plughole
Comparing quotes
- Whether the price covers travel
- Whether the price is fixed and includes VAT
- What preparation is included
- Whether the colour is mixed to match
FAQs for Roosebeck
Something went through my bath. Can it be fixed?
Normally. Photos of the hole and the underside help us check.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Do you come to Roosebeck?
Yes. We work across the UK and come to Roosebeck and the rest of Cumbria. Send us pictures for a fixed quote, or call 0345 017 0787.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Can you repair a crack in an acrylic bath?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
About Roosebeck
Roosebeck is about 4 miles east of Barrow-in-Furness, in Cumbria. Whether you are in the middle of Roosebeck or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 438 places in Cumbria, from the larger towns to small villages. You can also see our page for Liverpool, about 49 miles away.
Here we cover the LA12 and LA13 postcode area. That includes homes on Meadow Lane and Peasholmes Lane and the roads around them. We also cover the places around Roosebeck: Downfield (1 mile north), Rampside (1 mile south-west), Leece (1 mile north-west), Newbiggin (1 mile north-east) and Dendron (2 miles north). Further out, we also cover Barrow-in-Furness (4 miles west), Ulverston (7 miles north), Hindpool (4 miles west), Salthouse (3 miles west), Dalton-in-Furness (4 miles north) and Risedale (3 miles west).
Landmarks near Roosebeck
In Roosebeck, that means homes near St Michael's. The nearest railway station is Roose station, roughly 2.4 miles north-west of the centre. Well-known places in the area include Portland Walk Shopping Centre (3.6 miles west) and Furness Abbey Museum (3.5 miles north-west). For a walk, there is Urswick Tarn and Birkrigg Common.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
