Suffolk · England

Bath chip & crack repair in Rose Hill, Suffolk

Our technicians come to Rose Hill for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Rose Hill homes

What we are called out for in Rose Hill

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.

People generally call us after spotting one of these:

  • An old repair that has yellowed or come loose
  • A chipped rim or side
  • Rusty patches near the plughole
  • Hairline or through cracks in acrylic

Questions to ask before booking

  • What happens if the damage is worse than the photos show
  • Aftercare advice
  • Whether the price is fixed and includes VAT
  • How the colour is matched

Our hiring checklist

How we handle bath repair in Rose Hill

Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Our repair technicians work on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and people most frequently call us about chips under the taps and chips along the edge of the bath.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Before and after: a damaged acrylic bath corner repaired in place
Where
Rose Hill (IP3, IP4)
Region
Suffolk
Cover
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Looking after it afterwards

So the finish stays in good condition for years:

  • Keep metal cans and razors off the surface
  • Give the bath a quick rinse after use
  • Make sure an acrylic bath is firm underfoot
  • Cover the bath during DIY or decorating

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.

The process

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a few hours, and we finish by cleaning up and talking you through the result.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Have somewhere for us to park nearby if possible
  • Clear toiletries, mats and anything else from around the area

Get a quote

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Send photos for a quote

Related advice

When we would advise against a repair

Honesty matters more than a booking, so here’s what a repair will not do:

  • A bath worn all over, where resurfacing makes more sense
  • Acrylic cracks with no access behind them
  • A bath that moves underfoot, until its support is fixed

If in doubt, send pictures and we will say what we think before booking.

What we work on

  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel

Landlord and trade work in Rose Hill

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Rose Hill and nearby

Rose Hill is about 1 mile east of Ipswich, in Suffolk. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Rose Hill is one of 731 places in Suffolk we cover. Our jobs stretch from Rose Hill to London (about 67 miles away).

Postcode districts we cover here: IP3 and IP4. Streets in the area include Alan Road, York Road and Bull Road, all of which we cover. Rose Hill sits on or near the A1156, which makes travel easy. We also travel to California (1 mile north), Racecourse (1 mile south-east), Rushmere (1 mile north-east), Priory Heath (1 mile south-east) and Stoke (1 mile west). Larger places within reach include Felixstowe (9 miles south-east), Stowmarket (12 miles north-west), Kesgrave (3 miles east), Woodbridge (6 miles north-east), Hadleigh (9 miles west) and Needham Market (9 miles north-west).

Local landmarks in Rose Hill

Locally, our jobs take us to homes close to Church of St Bartholomew, Copleston High School and Rose Hill Primary. Also close by are The Railway Hotel (less than half a mile north-east), Alexandra Park (0.6 miles west) and Learning Support (1 mile north-east). Rose Hill has its own railway station: Derby Road station. Other landmarks nearby include Ipswich St Mary Stoke (1.8 miles west) and St Clement's Hospital (0.5 miles east). For a walk, there’s Papermill Reedbed.

Map of Rose Hill © OpenStreetMap contributors

What bath repair costs

Prices start from £95. We give every job a fixed price from photos. These are the things that affect it:

  • Whether we combine several jobs
  • Any earlier repairs that need removing first
  • How many areas need work
  • Access to the area

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Getting a price from pictures

Two or three clear photos are typically enough. It helps if you send:

  • Natural light rather than flash
  • Something in shot to show the size
  • Details of any past repairs
  • A clear, close picture of the problem area

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

What your bath is made of matters

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

FAQs for Rose Hill

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Do you repair coloured baths?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.

How much does bath repair cost in Rose Hill?

Repairs from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Do the materials smell?

There can be some smell while we work. It clears as the materials cure.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.