Devon · England

Bath chip & crack repair in Rushford, Devon

Bath repair across Rushford and nearby, done in a single visit in most cases.

  • Repairs from £95
  • Deep scratches in acrylic
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Rushford?

How we handle bath repair in Rushford

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. Common call-outs are for rust spots around the plughole and scratches you can feel with a fingernail, across cast iron enamel, pressed steel enamel and whirlpool & spa baths.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Where
Rushford (PL19)
Area hub
Devon
Cover
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

What we cannot put right

We will not take on work that won’t last, so these are the limits:

  • A bath that moves underfoot, until its support is fixed
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Water coming from the waste or taps rather than the bath

If in doubt, send photos and we will say what we think.

Materials we work on in Rushford

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel

Common problems we fix in Rushford

A cracked acrylic bath usually wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.

Get in touch if you’ve noticed any of these:

  • Chips under the taps
  • Cracks in an acrylic bath
  • Damage done while the bathroom was being fitted
  • Impact holes in acrylic

What to look for in a quote

  • How changes to the job are handled
  • What aftercare is recommended
  • Whether the price covers travel
  • What protection goes down before work starts

How to compare quotes

What bath repair costs

Repairs from £95. Every quote is fixed and free. What we look at:

  • The material
  • How many areas need work
  • How easy the damage is to reach
  • Unusual colours or finishes

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.

How to get a fixed price

Phone photos are fine, there’s no need for anything special. Ensure they show:

  • Any details about the material
  • Any earlier repairs or coatings
  • Something in shot to show the size
  • A wider photo showing the entire bath

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Rushford and the surrounding area

Rushford is about 2 miles north-west of Tavistock, in Devon. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Rushford is one of 586 places in Devon we cover.

We cover every part of the PL19 postcode area and the streets around it. Nearby, we also work in Lamerton (1 mile north), Tavistock (2 miles south-east), Wilminstone (3 miles east), Tiddy Brook Meadows (3 miles south-east) and Whitchurch (4 miles south-east). Further out, we also cover Okehampton (15 miles north-east), Bere Alston (6 miles south), Horrabridge (6 miles south-east), Yelverton (7 miles south-east), Tamerton Foliot (10 miles south) and Lifton (7 miles north-west).

What’s near Rushford

Around Rushford, we work in homes near Blacksmiths Arms, Tavistock College and Church of St Peter. The closest station to Rushford is Gunnislake station, roughly 3.7 miles south. Well-known places in the area include Tavistock Museum (2.4 miles south-east) and Tavistock Hospital (2.2 miles south-east). Not far away are Hingston Down.

Map of Rushford © OpenStreetMap contributors

What happens on the day

The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes a few hours. At the end we talk you through the curing time and the aftercare.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Tell us about any previous repairs or coatings
  • Keep children and pets away from the room on the day

Get a quote

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Send pictures for a quote

Related advice

Rushford questions

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

What areas do you cover?

We cover the entire UK, including Rushford and the rest of Devon. Just include your postcode and we’ll offer you dates.

Will the repair last?

A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

What information do you need?

Send pictures through the quote form or call 0345 017 0787.

How long does the repair take to cure?

Normally the day after. We confirm the time before we leave.

Does someone need to be in?

We need someone to let us in. You do not need to watch us work.

Can you redo someone else’s repair?

In most cases. The old repair comes out first, so mention it when you send pictures.

Materials and what they mean for the repair

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

Can I fix it myself?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Why repair rather than replace?

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • CHAS and Constructionline accredited
  • One price list for the entire UK
  • Most jobs done in one visit
  • Fixed prices from your pictures

Read our prices page and resurfacing vs replacement cost guide.

Landlord and trade work in Rushford

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

We work for landlords, letting agents and housing providers in Rushford as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.