North Yorkshire · England
Bath chip & crack repair in Salton, North Yorkshire
Bath repair across Salton and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Rust by the waste and overflow
- Scratches you can feel with a fingernail
Landlords, agents and businesses in Salton
Landlords, letting agents and housing providers in Salton use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Bath repair in Salton, done in place
Most of our bath repairs take a few hours, and you can generally bathe again the next day. You won’t need a plumber or tiler, because nothing is disconnected. Whether it’s damage beneath the taps and rusty patches near the plughole, we can help, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Salton (YO62)
- County
- North Yorkshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Salton
Also in Salton
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Repair or replace in Salton?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
What you get with us
- Most jobs done in one visit
- Rooms protected and left tidy
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
Take a look at our pricing and guide to resurfacing and replacement costs.
FAQs for Salton
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What areas do you cover?
We work UK-wide, and that includes Salton. Prices do not change with location.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
How the visit works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Clear the area around the damage
- Open a window if you can
- Make sure the area is dry
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Advice
About Salton
Salton is about 19 miles north-east of York, in North Yorkshire. Wherever you are in the YO62 postcode area, we come to you. We cover 626 places in North Yorkshire. You can also see our page for Leeds, about 38 miles away.
Every address in YO62 is within our area, from the main roads to the quietest streets. If you’re just outside Salton, we cover East Ness (1 mile south-west), Great Edstone (3 miles north), Nunnington (3 miles west), Welburn (3 miles north-west) and Wombleton (4 miles north-west). Within a short drive, we also cover Malton (7 miles south-east), Pickering (6 miles north-east), Easingwold (13 miles south-west), Norton-on-Derwent (8 miles south-east), Kirkbymoorside (4 miles north) and Helmsley (7 miles west).
What’s near Salton
Our clients here include homes close to Church of St John of Beverley. Nearby you’ll also find Slingsby Castle (3.5 miles south).
What we’re called out for in Salton
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
If you can see any of these, send us a picture:
- Damage beneath the taps
- Rust spots around the plughole
- Snagging damage from a refit
- A hole punched through by something heavy
Comparing quotes
- What protection goes down before work starts
- A fixed price, and whether VAT is included
- What preparation is included
- Whether there are any call-out or travel charges
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Store metal items away from the bath
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
- Rinse the bath after use, especially in hard water areas
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
