Hampshire · England
Bath Repair for Sandleheath homes
Damaged bath in Sandleheath? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
Keeping it looking good
Simple care helps the repair last. We recommend:
- Cover the bath during DIY or decorating
- Have new chips seen to early
- Keep abrasive pads and gritty cleaners away from the bath
- Don’t leave razors or cans standing in the bath
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
About our bath repair in Sandleheath
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Typical jobs include rust spots around the plughole and deep scratches in acrylic, across whirlpool & spa baths, acrylic and cast iron enamel.
In a village like Sandleheath, some baths have been in for many years. A sound older bath is well worth repairing without disturbing the rest of the room.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Sandleheath (SP6)
- Region
- Hampshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Sandleheath questions
Is it worth repairing old baths in a period home in Sandleheath?
Generally, yes. Older baths are often worth repairing rather than replacing. Send us photos and we’ll tell you what’s possible.
Do you come out to small places like Sandleheath?
Yes, we do: small places like Sandleheath are covered as standard. Just mention any tricky access.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Do you come to Sandleheath?
Yes. We cover the whole UK and travel to Sandleheath. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
What we do, step by step
We work cleanly and quietly. We protect the area first, then the job itself takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare. Somewhere as small as Sandleheath, access is usually the main thing to plan. Once on site, the job is the same as anywhere.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the following day.
Preparing for the visit
- Make sure the area is dry
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
Getting a price
If you’re in Sandleheath and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- Wear across the whole surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we will say what we think.
What we work on
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
Should you replace it?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. In an older home in a village like Sandleheath, replacing a bath can be harder than it sounds: original pieces may not match modern sizes, and access can be awkward. Repairing avoids those problems.
Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- No extra charge for your area
- One-year guarantee on every repair
- One visit for most repairs
- We come to you, anywhere in the UK
Take a look at our Prices page And Guide to resurfacing and replacement costs.
Signs you need bath repair in Sandleheath
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Typical reasons for a call-out include:
- Rust spots around the plughole
- Chips under the taps
- Impact holes in acrylic
- Chips on the rim or sides
For older houses around Sandleheath, near landmarks such as Sandleheath Uniting Church, it may still have its original cast iron bath, which is well worth repairing or re-enamelling rather than replacing.
What your quote should include
- Whether the price covers travel
- How the colour is matched
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
Sandleheath homes and their baths
Sandleheath is about 5 miles north-east of Verwood, in Hampshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 683 towns and villages in Hampshire.
We work across SP6 for bath repair and the streets around it. If your bath is in a house or flat on Elms Close, Main Road and Old Brickyard Road or anywhere close by, a technician can come to you. If you are just outside Sandleheath, we cover Ashford (1 mile east), Alderholt (1 mile south), Damerham (1 mile north-west), Rockbourne (2 miles north) and Broxhill (2 miles south-west). Further out, we also cover Totton (14 miles east), Romsey (15 miles east), New Milton (14 miles south-east), Ringwood (6 miles south), Barton on Sea (15 miles south-east) and Ashley (14 miles south-east).
Local landmarks in Sandleheath
Further afield, we also cover the area around Fordingbridge Museum (1.5 miles east) and Godshill Castle Hill (2.7 miles east). The countryside around Sandleheath includes Blashford Lakes.
What else we do in Sandleheath
About our accreditations · Every repair comes with a one-year guarantee.
