Leicestershire · England
Bath Repair in Skeffington
We travel to Skeffington for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
How to look after the repair
Once the work has cured, treat it gently:
- Store metal items away from the bath
- Put a towel in the bath if you’re working above it
- Avoid scourers, wire wool and gritty cream cleaners
- Give the bath a quick rinse after use
There’s nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Bath repair in Skeffington, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We regularly repair whirlpool & spa baths, roll-top & freestanding and pressed steel enamel, and the jobs we see most are hairline or through cracks in acrylic and a failed DIY repair that’s discoloured or lifting.
All our work is covered by our one-year guarantee, wherever you are in Leicestershire.
- Location
- Skeffington (LE7)
- Area hub
- Leicestershire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
We turn up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Let the surface dry out before the visit
- Let us know which floor the room is on
- Ensure the room can be ventilated
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Read more
Do you need bath repair in Skeffington?
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Typical reasons for a call-out include:
- Damage beneath the taps
- Hairline or through cracks in acrylic
- Holes from dropped items
- Rust by the waste and overflow
Comparing quotes
- How the colour is matched
- How soon you can use it again
- A fixed quote, and whether VAT is included
- Whether there are any call-out or travel charges
Repairs by material
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Honest limits
It helps to know what we cannot do:
- Cracks in acrylic we cannot reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Landlord and trade work in Skeffington
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Why repair rather than replace?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Why choose Surface Doctor in Skeffington
- Every repair guaranteed for a year
- No need to remove anything
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
Read our prices page or guide to resurfacing and replacement costs.
FAQs for Skeffington
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
How long before I can use the bath?
Normally by the following day, depending on the repair.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Also near Skeffington
What else we do in Skeffington
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
About Skeffington
Skeffington is about 7 miles east of Oadby, in Leicestershire. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Skeffington is one of 287 places in Leicestershire we cover. Our jobs stretch from Skeffington to Birmingham (about 43 miles away).
Jobs in LE7 work the same way as everywhere else we cover. You’ll find streets such as Main Street and Uppingham Road, and we cover them all. Close by, we cover Billesdon (1 mile west), Tilton on the Hill (2 miles north), Cold Newton (3 miles north-west), Lowesby (3 miles north) and Gaulby (3 miles west). We also work in nearby towns such as Wigston (9 miles west), Melton Mowbray (10 miles north), Syston (9 miles north-west), Blaby (12 miles west), Broughton Astley (15 miles south-west) and Sileby (11 miles north-west).
Local landmarks in Skeffington
Our clients here include homes close to Church of St Thomas a Becket. A little further out are Billesdon Rural District (1.9 miles west) and Sauvey Castle (3.2 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
