Derbyshire · England

Bath Repair for Spinkhill homes

Our technicians come to Spinkhill for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Spinkhill

About our bath repair in Spinkhill

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Typical jobs include chips under the taps and chips along the edge of the bath, on pressed steel enamel, acrylic and roll-top & freestanding.

Your repair is guaranteed for a year, as with every job we do.

Where
Spinkhill (S21)
Region
Derbyshire
Guarantee
A year, on every repair
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Stick to mild cleaners and a soft cloth
  • If an acrylic bath flexes, have its feet adjusted
  • Rinse the bath after use, especially in hard water areas
  • Keep metal cans and razors off the surface

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

What we do, step by step

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Point us to the nearest place to park
  • Keep pets and children out of the room while we work
  • Ensure the room can be ventilated

Ask for a price

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a free quote

Related advice

Landlords, agents and businesses in Spinkhill

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Different materials, different repairs

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

When to call us in Spinkhill

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

The most common problems we’re called about are:

  • Snagging damage from a refit
  • An old repair that has yellowed or come loose
  • Holes from dropped items
  • Scuffs and scratches in the surface

Before you book anyone

  • Whether the price covers travel
  • What protection goes down before work starts
  • What preparation is included
  • How changes to the job are handled

Our hiring checklist

Repairing versus replacing in Spinkhill

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

What you get with us

  • No extra charge for your area
  • Most jobs done in one visit
  • Straight answers about what a repair can do
  • CHAS and Constructionline accredited

Take a look at our pricing or bath cost comparison.

What affects the price in Spinkhill

Prices start from £95. Every quote is fixed and free. What we look at:

  • The type of damage
  • Previous DIY repairs that have to come out
  • How hard the colour is to match
  • Where the damage is and how we get to it

A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.

Send photos for a quote

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • A coin beside the damage so we can judge size
  • A picture taken from further back
  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.

Spinkhill: your questions answered

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.

How soon can you come?

We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Will the repair last?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.

Do you cover the whole of Derbyshire?

Across the UK, and that includes Spinkhill. Prices do not change with location.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can you repair something that’s been repaired before?

Normally, yes. The old repair comes out first, so mention it when you send photos.

Can you price it without visiting?

Generally, yes. Clear pictures let us give you a fixed price without visiting.

Covering Spinkhill

Spinkhill is about 3 miles north-east of Staveley, in Derbyshire. Jobs in Spinkhill are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We cover all 532 towns and villages across Derbyshire, from the larger towns to small villages. We work right across the region, from Spinkhill to Leeds (about 36 miles away).

Jobs in S21 are booked in the same way as anywhere else. Local streets include Station Road, College Road and The Lane, all of which we cover. Nearby, we also work in Killamarsh (1 mile north), Eckington (2 miles west), Beighton (2 miles north), Mosborough (3 miles north-west) and Plumbley (3 miles north-west). Within a short drive, we also cover Chesterfield (7 miles south-west), Dronfield (6 miles west), Bolsover (5 miles south), Staveley (3 miles south-west), Matlock (15 miles south-west) and Clay Cross (10 miles south).

Around Spinkhill

Around Spinkhill, we work in homes near St Matthew, The Angel pub and Barlborough Hall School and the streets around them. Other local landmarks include Immaculate Conception Catholic Primary (under half a mile west) and Mount St Mary's College (within half a mile north). Spinkhill’s nearest station is Kiveton Bridge station, roughly 3.4 miles north-east of the centre. Nearby you will also find Bolsover Castle (5 miles south) and Bolsover Hospital (5.1 miles south).

Map of Spinkhill © OpenStreetMap contributors

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.