Wirral · England
Bath chip & crack repair in Poulton, Wirral
Our repair technicians come to Poulton for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips under the taps
How we handle bath repair in Poulton
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Whether it’s chips caused by builders and scratches you can feel with a fingernail, we can help.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Poulton (CH63, CH62)
- Region
- Wirral
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What bath repair costs
Repairs from £95. There’s no area surcharge for Poulton. The price reflects:
- How hard the colour is to match
- Doing more than one item at once
- Where the damage is and how we get to it
- What kind of damage it is
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- Any details about the material
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Poulton and nearby
Poulton is about 1 mile south-west of Bebington, in Wirral. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We work in all 44 towns and villages in Wirral, from the larger towns to small villages. You can also see our page for Liverpool, about 6 miles away.
Here we cover the CH63 and CH62 postcode area. From Inley Road, Tyburn Road and Firs Avenue or anywhere nearby, we can come to you. If you’re just outside Poulton, we cover Spital (1 mile north-east), Lower Bebington (1 mile north), Clatterbridge (1 mile south-west), Higher Bebington (2 miles north-west) and Brimstage (2 miles west). Within a short drive, we also cover Birkenhead (4 miles north-west), Wallasey (6 miles north), Heswall (4 miles west), Moreton (6 miles north-west), West Kirby (7 miles west) and Greasby (6 miles north-west).
Landmarks near Poulton
Typical jobs here are in homes near Holy Trinity, Poulton Lancelyn Primary School and Marfords Park, among other places. Nearby too are Wellington School (1.3 miles north), Wirral Grammar School for Boys (0.9 miles north) and Three Stags pub (within half a mile north). For rail, the closest station is Spital station, roughly 0.6 miles north-east. Nearby you will also find Liverpool Castle (4.8 miles north) and Port Sunlight Museum (1.3 miles north). Not far away are New Ferry Butterfly Park and Princes Park lake.
- Local facilities include Municipal Borough of Bebington (1 mile north)
Keeping it looking good
Nothing complicated is needed:
- Give the bath a quick rinse after use
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
- Check that an acrylic bath doesn’t move when you stand in it
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Your questions about bath repair in Poulton
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Are there extra charges for Poulton?
Travel is included in the price, with the same prices everywhere we work.
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.
How invisible is a bath repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Do you need bath repair in Poulton?
A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
You may need us if you’ve spotted:
- Chips caused by builders
- Cracks in an acrylic bath
- An old repair that has yellowed or come loose
- Scuffs and scratches in the surface
Comparing quotes
- How long it needs to cure
- How your room will be protected
- A fixed quote, and whether VAT is included
- Whether there are any call-out or travel charges
Places near Poulton
Also in Poulton
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take two to three hours for most chips.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the next day, the bath is ready to use.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What we can’t put right
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- Wear across the entire surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Landlord and trade work in Poulton
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
