Gloucestershire · England
Bath chip & crack repair in St Peter’s, Gloucestershire
We travel to St Peter’s for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips on the rim or sides
- Rusty patches near the plughole
How we handle bath repair in St Peter’s
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Typical jobs include damage done while the bathroom was being fitted and chips on the rim or sides, in roll-top & freestanding, acrylic and cast iron enamel.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- St Peter’s (GL51, GL50, GL52)
- Region
- Gloucestershire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
St Peter’s and the surrounding area
St Peter’s is about 1 mile north-west of Cheltenham, in Gloucestershire. Whether you are in the middle of St Peter’s or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. St Peter’s is one of 470 places in Gloucestershire where we work. Our jobs stretch from St Peter’s to Birmingham (about 40 miles away).
We cover every part of the GL51, GL50 and GL52 postcode area. Streets in the area include Arle Road, Roman Road and Addis Road, and we cover them all. With the A4019 close by, St Peter’s is easy for our technicians to reach. Neighbouring places we cover include Alstone (1 mile south-east), St Paul's (1 mile south-east), Pittville (1 mile east), Fairview (1 mile east) and Swindon (1 mile north). Within a short drive, we also cover Gloucester (7 miles south-west), Stroud (13 miles south-west), Tewkesbury (6 miles north), Cirencester (14 miles south-east), Bishop's Cleeve (3 miles north-east) and Brockworth (5 miles south-west).
Local landmarks in St Peter’s
Locally, our jobs take us to homes close to Gloucester Road Primary School, The Umbrella pub and Dean Close School. You’ll also find Pittville Park (1 mile east), St Peter's Church (under half a mile north-east) and All Saints' Academy (0.9 miles north-west). The nearest railway station is Cheltenham Spa station, roughly 0.6 miles south of the centre. A little further out are Emmas Grove (4.4 miles south) and Cheltenham General Hospital (1.4 miles south-east). Open spaces near St Peter’s include Chosen Hill.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Other services in St Peter’s
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the following day.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
- Let us know about parking or access
Getting a price
To get a price, send a couple of pictures using our quote form or call us. We will say immediately whether it can be repaired.
Read more
Repairing versus replacing in St Peter’s
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in St Peter’s
- A fixed quote before booking
- We come to you, anywhere in the UK
- Generally one visit, start to finish
- No need to remove anything
See our full price list and bath cost comparison.
Common problems we fix in St Peter’s
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.
The things customers usually mention when they call include:
- Hairline or through cracks in acrylic
- Snagging damage from a refit
- A chip where the taps sit
- A failed DIY repair that’s discoloured or lifting
What to look for in a quote
- What protection goes down before work starts
- What prep work is covered
- Whether there are any call-out or travel charges
- What aftercare is recommended
Landlords, agents and businesses in St Peter’s
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
How to care for the repair
Once the work has cured, treat it gently:
- Rinse it down after each bath
- Stick to mild cleaners and a soft cloth
- Do not leave razors or cans standing in the bath
- If an acrylic bath flexes, have its feet adjusted
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Honest limits
In fairness, there are a few things a repair will not fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
Send us photos and we will tell you honestly.
Materials we work on in St Peter’s
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Your questions about bath repair in St Peter’s
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
How long before I can use the bath?
Normally by the following day, though it depends on what we’ve done.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Do you work in St Peter’s?
Yes. We work across the UK and travel to St Peter’s and the rest of Gloucestershire. Send pictures and we will quote, or call 0345 017 0787.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from photos. You will get a fixed figure before you book.
About our accreditations · Every repair comes with a one-year guarantee.
