Cumbria · England
Bath chip & crack repair in Stainburn, Cumbria
Problem with your bath in Stainburn? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- Snagging damage from a refit
Bath repair in Stainburn without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We regularly repair roll-top & freestanding, whirlpool & spa baths and acrylic, and people most often call us about deep scratches in acrylic and rust spots around the plughole.
All of our repairs are guaranteed for twelve months in Stainburn and everywhere else. We return to put right any problem with the work.
- Location
- Stainburn (CA14)
- Area hub
- Cumbria
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
Before you book, it’s worth knowing the limits too:
- Cracks in parts of an acrylic bath we can’t get to from below
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Stainburn
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and we leave the room as we found it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the following day.
How to prepare
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Related advice
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Nearby places to Stainburn
More services for Stainburn
Should you replace it?
Swapping a damaged bath for a new one normally means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before you book, with nothing added on the day.
Why book with us
- Colours mixed by hand to suit your surface
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
Take a look at our full price list and bath cost comparison.
Where we work around Stainburn
Stainburn is about 1 mile north-east of Workington, in Cumbria. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Stainburn is one of 438 towns and villages in Cumbria where we work. You can also see our page for Newcastle upon Tyne, about 79 miles away.
Postcode districts we cover here: CA14. Jobs here include addresses on Moor Road, Uldale Road and Linden Walk and the roads around them. We also cover the places around Stainburn: Barepot (1 mile south-west), Seaton (1 mile north), Workington (1 mile south-west), Moorclose (1 mile south-west) and Siddick (2 miles north-west). We also work in nearby towns such as Whitehaven (8 miles south), Maryport (5 miles north), Cockermouth (6 miles east), Cleator Moor (9 miles south), Bransty (7 miles south-west) and Egremont (11 miles south).
Near you in Stainburn
Typical jobs here are in homes near Soul Suite pub, Ashfield Junior School and Workington Academy. The nearest railway station is Workington station, roughly 1.6 miles west. Other landmarks nearby include Workington Transport Heritage Trust (0.7 miles north-west) and Dunmail Park (1.6 miles north-west). For a walk, there’s Siddick Pond.
How to look after the repair
Looking after the surface is easy:
- Cover the bath during DIY or decorating
- Avoid scourers, wire wool and gritty cream cleaners
- If an acrylic bath flexes, have its feet adjusted
- Use a soft cloth and washing-up liquid for everyday cleaning
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we look at:
- Access to the area
- Any earlier repairs that need removing first
- Doing more than one item at once
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
Phone pictures are fine. Ensure they show:
- Natural light rather than flash
- The material, if you know it
- A wider photo showing the whole bath
- Where you are, by postcode
Send us pictures of the damage and a wider shot of the entire item, and tell us you’re in Stainburn, and we will reply with a fixed quote.
Questions from Stainburn
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
What happens next?
We review the photos and send a fixed quote and the next dates we have.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is a cracked acrylic bath repairable?
Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
