Cumbria · England
Bath Repair in Siddick
Fixed-price bath repair in Siddick and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Chips under the taps
- Rust spots around the plughole
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Bath repair in Siddick, done in place
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We work on acrylic, roll-top & freestanding and cast iron enamel, and common reasons people get in touch are hairline or through cracks in acrylic and a chip where the taps sit.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Siddick (CA14)
- County
- Cumbria
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Siddick
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
The things clients generally mention when they call include:
- Rust by the waste and overflow
- A failed DIY repair that is discoloured or lifting
- Damage done while the bathroom was being fitted
- Scuffs and scratches in the surface
Before booking anyone
- Who will actually do the work
- If travel is included in the price
- What happens if the damage is worse than the pictures show
- How long it needs to cure
Honest limits
In fairness, some problems need a different fix:
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
- Wear across the whole surface, which needs re-enamelling
Send us photos and we will tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
FAQs for Siddick
What areas do you cover?
We cover the entire UK, including Siddick and the rest of Cumbria. Just include your postcode and we will offer you dates.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
What happens next?
We review the photos and send a fixed quote and the next dates we have.
Other services in Siddick
Looking after it afterwards
To keep it looking its best:
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Don’t leave razors or cans standing in the bath
- Rinse it down after each bath
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Repair or replace in Siddick?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Siddick
- Colour-matched on site
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your pictures
Take a look at our pricing or guide to resurfacing and replacement costs.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
The process
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. Allow a few hours, depending on the damage, and we will keep you posted as we go.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
About Siddick
Siddick is about 2 miles north of Workington, in Cumbria. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. We work in all 438 towns and villages across Cumbria. Our jobs stretch from Siddick to Newcastle upon Tyne (79 miles away).
Our technicians cover all of the CA14 postcode area and the streets around it. Whether you live on Shore Side, Helder Street and Senhouse Street or anywhere nearby, a technician can come to you. We also cover the places around Siddick: Seaton (1 mile east), Stainburn (2 miles south-east), Barepot (2 miles south-east), Workington (2 miles south) and Flimby (2 miles north-east). Larger places within reach include Whitehaven (9 miles south), Maryport (4 miles north-east), Cockermouth (8 miles east), Cleator Moor (10 miles south), Bransty (8 miles south) and Egremont (13 miles south).
Near you in Siddick
Our customers here include homes close to Northside Primary School, St Paul's and St Joseph's Catholic High School, among other places. The nearest railway station is Workington station, roughly 1.4 miles south. Well-known places in the area include Dunmail Park (0.6 miles south) and Workington Transport Heritage Trust (1.3 miles south-east). Open spaces near Siddick include Siddick Pond.
About our accreditations · Every repair comes with a one-year guarantee.
