Cumbria · England
Non-slip bath & shower coating in Stainburn, Cumbria
Clear non-slip coatings for baths and shower trays at your home in Stainburn, with a one-year guarantee on every repair.
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Non-slip bath coating in Stainburn, done in place
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Our repair technicians work on enamelled baths, resurfaced baths and wet room floors (ask us), and common reasons people contact us are resurfaced baths that are now too smooth and a bath or tray that is slippery when wet.
We stand behind the work with a one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Stainburn (CA14)
- Area hub
- Cumbria
- Cover
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
If you manage property in Stainburn, we will quote for several properties at once. Just send photos for each address and we will price them together.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Also near Stainburn
Also in Stainburn
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What we are called out for in Stainburn
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
The most common problems we’re called about are:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Comparing quotes
- How long it needs to cure
- What prep work is covered
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
Stainburn questions
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
What does non-slip bath coating cost?
Every job gets a fixed price based on photos of the damage. Send a close-up and a photo of the whole item with your CA14 postcode.
Which areas do you work in?
Across the UK. Prices do not change with location.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.
Is my repair covered?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
What non-slip bath coating costs
A fixed quote means you know the cost before you book. We look at:
- Previous DIY repairs that have to come out
- What the surface is made of
- Doing more than one item at once
- The colour and finish to match
Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from photos
Before you send pictures, a few simple things make all the difference:
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- One picture of the entire bath or shower tray
- A close-up of the damage, in focus
Upload photos of the damage and a wider shot of the whole item, with your CA14 postcode, and we will reply with a fixed quote.
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- Straight answers about what a repair can do
- One visit for most repairs
- Free fixed quotes from pictures
- Repair technicians who travel to you, UK-wide
See our pricing.
About Stainburn
Stainburn is about 1 mile north-east of Workington, in Cumbria. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 438 towns and villages in Cumbria, from the larger towns to small villages. Our jobs stretch from Stainburn to Newcastle upon Tyne (79 miles away).
Every address in CA14 is covered, from the main roads to the quietest streets. From Moor Road, Uldale Road and Linden Walk or a nearby road, we can come to you. We also travel to Barepot (1 mile south-west), Seaton (1 mile north), Workington (1 mile south-west), Moorclose (1 mile south-west) and Siddick (2 miles north-west). Larger places within reach include Whitehaven (8 miles south), Maryport (5 miles north), Cockermouth (6 miles east), Cleator Moor (9 miles south), Bransty (7 miles south-west) and Egremont (11 miles south).
Local landmarks in Stainburn
Around Stainburn, we work in homes near Soul Suite pub, Ashfield Junior School and Workington Academy. The closest station to Stainburn is Workington station, about 1.6 miles west. Other landmarks nearby include Workington Transport Heritage Trust (0.7 miles north-west) and Dunmail Park (1.6 miles north-west). Green spaces nearby include Siddick Pond.
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair won’t do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly before you book.
What we work on
- Resurfaced baths
- Acrylic baths
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
How the visit works
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow a few hours.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
Get a quote
Most customers in Stainburn get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
