Telford and Wrekin · England
Bath re-enamelling & resurfacing in Standford Bridge, Telford and Wrekin
Bath re-enamelling across Standford Bridge and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
Standford Bridge and nearby
Standford Bridge is about 4 miles north-west of Newport, in Telford and Wrekin. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Standford Bridge is one of 79 places in Telford and Wrekin we cover. Our jobs stretch from Standford Bridge to Birmingham (33 miles away).
We work across the TF10 postcode area. We also travel to Sambrook (1 mile north-east), Hinstock (2 miles north-west), Woodlane (2 miles north), High Heath (2 miles north-west) and Child's Ercall (2 miles west). Within a short drive, we also cover Telford (9 miles south), Wellington (8 miles south), Dawley (10 miles south), Oakengates (8 miles south), Newport (4 miles south-east) and The Rock (9 miles south).
Local landmarks in Standford Bridge
We visit homes around Church of St. Luke, among other places. A little further out are Cheswardine Castle (4 miles north). The countryside around Standford Bridge includes Aqualate Mere and Quarry Wood.
About our bath re-enamelling in Standford Bridge
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Our repair technicians work on cast iron baths, acrylic baths and basins & shower trays, and people most often call us about an outdated colour you’d like to change and a period or roll-top bath worth keeping.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Location
- Standford Bridge (TF10)
- County
- Telford and Wrekin
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Standford Bridge
What else we do in Standford Bridge
Signs you need bath re-enamelling in Standford Bridge
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
It’s worth getting a quote if you see:
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Before booking anyone
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- A bath split right through the body
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Standford Bridge. The price reflects:
- How hard the colour is to match
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- How many areas need work
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- One sharp close-up of the damage
- Something in shot to show the size
- Any earlier repairs or coatings
- The material, if you know it
To get a price, send two or three pictures using our quote form or ring us. We’ll say immediately if a repair is the right fix.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Repairing versus replacing in Standford Bridge
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
What you get with us
- Technicians who travel to you, UK-wide
- One visit for most repairs
- Colour-matched on site
- Dust sheets down, tidy finish
See our prices page or guide to resurfacing and replacement costs.
FAQs for Standford Bridge
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you cover Standford Bridge?
Yes, we do. We send a technician to Standford Bridge for every job, with no extra charge for travel.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
How do I get a price for bath re-enamelling in Standford Bridge?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
The process
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a full day, including clearing up.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
Getting a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
