Derbyshire · England
Bath chip & crack repair in Stanley, Derbyshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Stanley, carried out at your home and guaranteed for a year.
- Repairs from £95
- Snagging damage from a refit
- Chips along the edge of the bath
How we handle bath repair in Stanley
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Our technicians work on acrylic, roll-top & freestanding and cast iron enamel, and people most often call us about cracks in an acrylic bath and deep scratches in acrylic.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Where
- Stanley (DE7)
- Region
- Derbyshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Looking after it afterwards
Aftercare is simple:
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
- Rinse it down after each bath
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
What we cannot put right
We will not take on work that will not last, so these are the limits:
- Cracks in parts of an acrylic bath we can’t get to from below
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Stanley
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
When to call us in Stanley
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
The most common problems we’re called about are:
- Rust by the waste and overflow
- Chips along the edge of the bath
- Impact holes in acrylic
- Damage beneath the taps
Questions to ask before you book
- When it can be used again
- Whether they match the colour on site
- How long the guarantee is and what it covers
- Who turns up on the day
Stanley and the surrounding area
Stanley is about 3 miles west of Ilkeston, in Derbyshire. Jobs in Stanley are booked in like any other job: a fixed quote from photos, then a visit to do the work. Stanley is one of 532 towns and villages in Derbyshire where we work. Our jobs stretch from Stanley to Birmingham (about 40 miles away).
All of DE7 is within our area. Jobs here include addresses on Station Road, Glebe Crescent and Queens Avenue and the roads around them. If you’re just outside Stanley, we cover West Hallam (1 mile north-east), Stanley Common (1 mile north), Dale Abbey (2 miles south-east), Mapperley (2 miles north-east) and Kirk Hallam (2 miles east). We also work in nearby towns such as Swadlincote (15 miles south-west), Ilkeston (3 miles east), Long Eaton (6 miles south-east), Belper (6 miles north-west), Heanor (4 miles north) and Ripley (6 miles north).
What’s near Stanley
Locally, our jobs take us to homes close to St Andrew's CofE Primary School, Church of St Andrew and Saint John Houghton Catholic Voluntary Academy and the streets around them. Stanley’s nearest station is Spondon station, about 3.6 miles south-west. Well-known places in the area include Mr Vacuum Cleaner Museum (3.8 miles north) and Horston Castle (3.2 miles north-west).
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Stanley
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- Typically one visit, start to finish
See our pricing or guide to resurfacing and replacement costs.
Towns and villages near Stanley
Other services in Stanley
Landlords, agents and businesses in Stanley
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Send the address, pictures and access details.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
The process
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
- Tell us if there are stairs or a lift
Get a quote
Upload pictures of the damage and one of the whole item, and tell us you’re in Stanley, and we will reply with a fixed quote.
Advice
Common questions in Stanley
Will the repair show?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
About our accreditations · Every repair comes with a one-year guarantee.
