Pembrokeshire · Wales
Bath Repair for Stepaside homes
Fixed-price bath repair in Stepaside and the surrounding area, typically in one visit.
- Repairs from £95
- Damage beneath the taps
- Rusty patches near the plughole
About our bath repair in Stepaside
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We’re often asked to fix a chip where the taps sit and an old repair that has yellowed or come loose, on whirlpool & spa baths, cast iron enamel and pressed steel enamel.
Big or small, it’s backed by a one-year guarantee.
- Location
- Stepaside (SA67)
- Region
- Pembrokeshire
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
How to care for the repair
Nothing complicated is needed:
- If an acrylic bath flexes, have its feet adjusted
- Cover the bath during DIY or decorating
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get any new chip repaired before it rusts
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Landlord and trade work in Stepaside
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Stepaside questions
How long does the repair take to cure?
Typically the following day. We’ll tell you the exact curing time when we finish.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Are there extra charges for Stepaside?
No. Our quotes include travel, with the same prices everywhere we work.
Do you work in Stepaside?
Yes. We work across the UK and travel to Stepaside. Send photos and we will quote, or call 0345 017 0787.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Something went through my bath. Can it be fixed?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Our work in Stepaside
Stepaside is about 12 miles east of Haverfordwest, in Pembrokeshire. Whether you’re in the middle of Stepaside or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Stepaside is one of 223 places in Pembrokeshire we cover.
Postcode districts we cover here: SA67. Jobs here include addresses on Kilgetty Lane and Bryn Beudy. We also cover the places around Stepaside: Summerhill (1 mile east), Ludchurch (2 miles north), Amroth (2 miles east), Llanteg (3 miles north-east) and Crunwere (4 miles north-east). Larger places within reach include Haverfordwest (12 miles west), Milford Haven (14 miles west), Pembroke (10 miles south-west), Pembroke Dock (11 miles west), The Marsh (12 miles west) and Dinbych-y-Pysgod (5 miles south).
Local landmarks in Stepaside
Typical jobs here are in homes near The White Horse pub, Sardis Congregational Chapel and Stepaside C.P. School, among other places. The nearest railway station is Kilgetty station, about 0.8 miles south-west. A little further out are Tenby Cottage Hospital (4.2 miles south) and Hean Castle Motte (1.2 miles south). For a walk, there is Craig-y-borion.
Signs you need bath repair in Stepaside
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.
Get in touch if you’ve noticed any of these:
- A kit repair that didn’t last
- Damage beneath the taps
- Rust spots around the plughole
- A hole punched through by something heavy
What to look for in a quote
- When it can be used again
- A fixed price, and whether VAT is included
- How changes to the job are handled
- Who turns up on the day
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Read more
When a repair is not the answer
In fairness, some problems need a different fix:
- Acrylic cracks with no access behind them
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Stepaside
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
Nearby places to Stepaside
Other services in Stepaside
What affects the price in Stepaside
Prices start from £95. Prices are worked out job by job, from your photos. The main factors are:
- What the surface is made of
- How many items we do on one visit
- How easy the damage is to reach
- The colour and finish to match
Our prices are the same across the UK, with no extra for Stepaside. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- A coin beside the damage so we can judge size
- A wider photo showing the whole bath
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
Upload a photo of the damage and one of the entire item, and tell us you’re in Stepaside, and we’ll come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
